1. Overflowing ice resurfacer water tanks are
eliminated with our patented fill control system.
The control consists of a remote sensor mounted on the resurfacer, a solenoid
valve and a control unit. When the resurfacing tank is full and starts to overflow,
the sensor detects it and sends a radio signal to the control unit which then shuts
off the hot water valve. The system is automatic. You do not need to pay
someone to stand there and watch the resurfacer tank fill up.
Ice resurfacing is also simplified with the time delay fill. Just program the fill
control like an alarm clock for a set time (e.g. 11:30am) or an interval (e.g. 90
minutes), put a hose in the filler, hit the start switch and forget it. At the
programmed time, the control will fill the resurfacer tank and shut itself off when
the tank is full.
- 2 line Alphanumeric Display -
Gives time, status or instructions
- Audible and visible alarms
- Adjustable backup safety timer
- Microprofessor controlled
(some features are programmable)
- Last fill history recall (used by
rink mangers to check on past
ice surface cut times)
- Low voltage controls for
electrical safety
- Easy to operate
- 12 month manufactures warranty
- System has a modular design,
upgrades can be installed on
any lower feature model at your
site if an additional feature is
desired at a future date
OTHER FEATURES
INCLUDE:
FIL-CT-4C Resurfacer Filing System
FIL-CT-4C-TEM Resurfacer Filling System with Temperature Sensor / Display
FIL-CT-4C-LEV Filling System with Level Sensor & Fill to a Set Level / Display
FIL-CT-4C-LEV-TEM Filling System with Temperature & Level Sensor
MODELS:
ETECK ENVIRO | WWW.ETECKENVIRO.CA | (647) 546-3684
One_Page_Enviro8.5x11.pdf 1 15-03-30 11:50 AM