1. CURRICULAM VITAE
NAME : MUHAMMED RISWAN
POSITION : MULTI-DISCIPLINARY INSPECTOR (MECHANICAL)
LOCATION : DUBAI, UAE
PHONE : +971 553 5987 59
EMAIL : rizuv5@gmail.com
SKYPE ID : muhammed.riswan
EDUCATION & TECHNICAL SKILLS
Bachelor Degree in Mechanical Engineering
University of Calicut, Kerala, India- 2009 with 65.2%
PG Diploma in Process Piping Engineering ASME B31.3
In Hyderabad, India - 2009
TRAINING AND SEMINARS
1. CSWIP 3.1 LEVEL 2 WELDING INSPECTOR CERT No. 84171
Organizer: TWI Training Centre worldwide
Date: - 10 Feb- 14 Feb 2014
Venue: Chennai –Tamil Nadu, India.
2. ISO 9001:2008 Internal Auditor Training
Organizer: Qatar Design Consortium,
Date: 28 Apr 2012
Venue: Best Western Hotel, Doha, Qatar.
3. NACE CIP LEVEL 1 CIP No. 39019
Organizer: NACE GATEWAY OF INDIA
Date: - 23 Apr- 28 Apr 2012
Venue: Cochin –Kerala, India
4. ASNT Level 2 in MT, PT, RT & UT
Organizer: Institute of Nondestructive testing
Date: - 1 Aug- 15 Aug 2013
Venue: Ernakulum –Kerala, India.
Commodities/Specialties
Welding Inspection
NDT Inspection
Painting/Coating
Inspection
Structural Steel Inspection
Bulk Material Inspections
CS Pipes & Fittings Inspection
Tanks and Steel Structure
Final Dossier review
PROFESSIONAL SUMMARY
• Having 6 years’ experience as QA/QC Engineer in steel structural and piping construction
projects including fabrication shop experience.
• Working as Third party inspector for different oil and gas projects.
• Developing and maintaining a quality process from the beginning to the end of the project.
• Easily handling problematic situations of the project even if it is either technical or
managerial.
• Supervising and monitoring the QA/QC activities in different Fabrication and piping stages.
1|P a g e
2. • Preparing and compiling QITP (Quality inspection test plan), WPS/PQR, WPQT (Welding
procedure qualification test), and QA/QC/ISO Procedures and submitting to client for
approval as per project specification.
• Familiar with painting quality control equipments.
• Review of WPS (welding procedure specification) and PQR (Procedure qualification record)
as per project specification.
• Familiar with welding standards like BS EN, AWS, ASME, API to have good knowledge
about welding techniques.
• Co-ordination of all destructive and Non-destructive testing at various sites for different
clients.
• Familiar with all type of painting systems which are using according to material and
environmental conditions.
• Familiar with surface preparation standards like NACE, SSPC and ISO to recognize
specified surface cleanliness.
• Prepare deviation reports to document for nonconforming conditions.
• Preparation & Submitting of Final dossier as per client requirement.
WORK EXPERIENCE (6+ Years Experience)
An experienced Quality Assurance/Quality Control professional with 6 years of experience
in Oil, Gas & Power Projects, having thorough knowledge of International Codes &
Standard and Quality procedures. Hand on experience in review and approval of Quality
documentation, Method Statements, Inspection & Test Plan.
Working for AMO & Partners Engineering Consultants Co. Nov.-2015 to till date
Major assignments are:
• Third Party Inspector on behalf of Petrofac Oman for the surveillance of fabrication and
painting works of pipe shoe supports and other miscellaneous items
• Third Party Inspector for Petrofac oman for witnessing HDPE Tensile and bend test.
• Third Party Inspector for Al Fanoy gas LLC and client Dolphin energy witnessed PQR
qualification for 40’’ pipe including Mechanical testing and WQT for 4”, 6” and ¾” pipes.
• Third Party Inspector for Al Fanoy gas LLC for Tuboscope and McWane witnessed
blasting/painting of skid, visual inspection of Electrofusion welding (HDPE), Fit up
inspection and visual inspection of gas piping works.
• Third Party Inspector for Worley parsons to witness inspection of PMI, hardness,
blasting/painting, final inspection, and marking & preservation of pipe spools.
• Third Party Inspector for Robtstone LLC and ADNOC project witnessed inspection for
pipelines both welding and thermal coating works including radiographic interpretation.
• Third party inspector for Petrofac and ADCO project and witnessed PMI and hardness
testing of stud bolts.
• Third party inspector for Petrofac and ZADCO Project and witnessed IGC
loading/unloading, chemical and mechanical testing of SS pipes and pipe fittings in
Lonestar lab.
• Third Party Inspector for JGSK (joint venture of JGS and SK Engineering) witnessed whole
inspection as per ITP for steel stacks, thermal dearrator tank & tower (ASME section
VIII), wind box and gas duct including NDE inspection (MPI).
• Third party inspector for pneumatic testing and hydro testing of vertical tanks and piping
according to project specification for different projects
• Carrying out Vendor Inspection/Expediting of materials and equipments like valves etc.
(Material inspection, welding inspection, painting & Coating inspection, valves testing,
functional test etc. and issuing Inspection Release Note as per clients requirements.
• Third Party Inspector for Procedure writing and Welder Qualification as per BS standard
and ASME standard.
Qatar Space Technology W.l.l (March 2011 – April 2015)
Position: QA/QC Inspection Engineer
2|P a g e
3. 1. Project: NAKILAT Ship Repair yard, Ras laffan Industrial city Qatar
Contractor: DAEWOO E&C (March 2011 – February 2012)
This project mainly comprises of below projects at onsite fabrication shop:
• Supply, Fabrication and installation of Structural and Miscellaneous items.
• Supply & Application of Painting/Coating works
Responsibilies:
• To identify the requirements, quality standards as per Project specification
• Participation of pre-inspection meetings with Client, Contractor and TPI for formulating the
ways of inspection with the approved inspection test plan.
• Preparation of different types of documentation, inspection formats and review final as
built drawings.
• Visual and DFT checking inspection of painting and wrapping application on all piping
components and preparing its inspection reports.
Welding
• Witness inspection of incoming (store) and outgoing material & Monitoring of material
traceability.
• Preparation of Welding Procedure Specification (WPS).
• Monitoring all welding activities as per approved WPS.
• Co- ordination with client and client inspector.
• Visual inspection of consumables by verifying MTC as per Filler Metal Application List
(FMAL).
• Witness of Welder Qualification Test.
• Witnessing Positive material identification & Hardness test.
• Capable of preparing weld history or summary sheet.
• Co-ordination with NDT technician and review of all NDT procedures including NDT
personal qualifications.
• Carried out inspection for fabrication/Set up/Welding and verified approved drawing
during inspection stages for the equipments such as vessels, heat exchangers, boilers.
• Maintain control records for welding consumable and welder performance record.
• Visual Inspection Before, during & after Welding.
• Witness daily Welding, PWHT, PMI, Hardness and NDT (RT, PT, MT & UT) activities.
• Monitor weld repair rate & implement corrective action to reduce the repair rate.
• Review and endorsed Quality documents after acceptance with relevant specifications and
standards.
Painting/Coating
• Responsible for monitoring and recording painting activities as required by the
Specification, Inspection & Test plan, and witnessing each stage till final inspection.
• Execute Painting/coating inspection work as per company/project inspection test plan.
• Monitor weather condition for surface preparation and painting/coating application.
• Hot dip galvanizing coating inspection in galvanizing plant.
• Review of calibration status of painting/coating gauges.
• Verification of Technical data sheets compliance with the specification.
• Verification of Paint materials shelf life, pot life, & Paints mixing ratio. Before paint
application paint system is verified according to client requirements.
• Check the residual surface chlorides before and after blasting.
• Check the blasting pressure at nozzle by using Hypodermic needle gauge.
• Witnessing WFT measurements during coating application.
• Visual Inspection of coating surface and DFT measurement including various standard
adhesion tests as per approved coating procedure/ITP.
• Inspection of surfaces after blasting (both abrasive blast & Water jetting blast)
• Check profile height by using Testex tape & Calibrated micrometer.
• Issuance of NCR’s for Violations found during inspection.
3|P a g e
4. • Responsible for preparation, Compilation and hand-over of all documentation from daily,
weekly, monthly, stage wise reports to final acceptance report. Holiday testing and DFT
checking of internal tanks.
2. Project: Lusail CP 3A phase 2 & CP 5B, Lusail city, Doha, Qatar (Fab shop)
Contractor: SAMSUNG C&T (February 2012 – August 2014)
• Supply & Fabrication of Temporary steel works for Suspension bridge.
• Supply, Fabrication & Installation of Mono-rail inside the tunnel.
• Supply, Fabrication & Installation of Miscellaneous works.
Responsibilities:
• Participation of meetings with client (Dorsch Qatar) and contractor for the quality
development of project.
• Suggestion of methods / procedures to improve the quality of working during kick off
meeting.
• Preparation of material approval submittal according to project specification
• Verifying incoming Raw materials which are coming to fab-shop for material identification
and Heat No. identification.
• Monitoring and preparing all the inspection carrying out in fab-shop as per fabrication
drawings.
• Had an important role in factory inspection done by Lusail Authority and Dorsch Qatar.
3. Project: Lusail Expressway, Doha Qatar (Fab Shop)
Contractor: HYUNDAI (February 2012 – August 2014)
• Supply & Fabrication of baseplate, stub and Arch accompanying all steel works. (Quality
Development stage)
• Supply & Fabrication of Single & Double Upthrust head for pre-tensioning the precasts
used. (Completed)
• Lusail Expressway utility hanging Structures. (Ongoing)
Responsibilities:
• Preparing weld procedure specification and procedure qualification record as per project
specification.
• Monitoring and preparing all the inspection carrying out in fab-shop as per fabrication
drawings.
• Reviewing and monitoring the project to consolidate the project specific requirements
related to quality of product, including the material requirements related to raw material,
Fabrication, Welding, NDE, Testing etc.
• Preparing work flow plan to improve quality of product according to project specification.
4. Project: Qatar Inegrated Railway Project (Aug14 – Apr 15) - Onsite Exp.
Contractor: Samsung-OHL-Qatar Building Company JV –Msherieb Major Station
: Impegrilo-SK E&C-Galfar Al Misnad JV – Red line North
Underground
Responsibilities:
• Preparing weld procedure specification and procedure qualification record as per EN
standards.
• Preparing and submitting Quality assurance documents like MAR, ITP, for waler beams in
SOQ and walling beams in ISG.
• Frequently had meetings with Quality and technical team for different jobs with both
clients.
• Coordinating with client and TPI for all type of inspections especially magnetic particle
testing for waler beams.
IPEBS PVT. LTD, From OCT 2009 to DEC 2010
4|P a g e
5. Hyderabad, India
Position: Layout Engineer
Project: ITC Paper & Pulp Industry, Hyderabad, India
• Project Comprises of Design and layout of largest paper and pulp industry in India using
PDMS 11. 6.
Responsibilities:
• Preparation of Equipment layout and piping layout.
• Reviewing of the pipe line routing, supporting and civil structure by using AutoCAD.
• Knowledge of GA Drawings & Isometrics based on P&ID & plant layout.
PERSONNEL PROFILE
Profile : Male, 29, Married
Nationality : Indian
Languages Known : English, Hindi & Malayalam
Passport No : H 6181738 (validity: 16 - 10 - 2019)
Driving License : Valid UAE, Qatar and Indian License
REFERENCES
Available upon request
5|P a g e
6. Hyderabad, India
Position: Layout Engineer
Project: ITC Paper & Pulp Industry, Hyderabad, India
• Project Comprises of Design and layout of largest paper and pulp industry in India using
PDMS 11. 6.
Responsibilities:
• Preparation of Equipment layout and piping layout.
• Reviewing of the pipe line routing, supporting and civil structure by using AutoCAD.
• Knowledge of GA Drawings & Isometrics based on P&ID & plant layout.
PERSONNEL PROFILE
Profile : Male, 29, Married
Nationality : Indian
Languages Known : English, Hindi & Malayalam
Passport No : H 6181738 (validity: 16 - 10 - 2019)
Driving License : Valid UAE, Qatar and Indian License
REFERENCES
Available upon request
5|P a g e