24 June 2014: additive manufacturing CDE themed competition briefing

OFFICIAL
Additive manufacturing for future
military equipment
CDE themed competition
24 June 2014
© Crown copyright 2013 Dstl
DSTL/PUB81972
25 June 2014

OFFICIAL
Presentation overview
• Introduction to the competition
• Navy military drivers
• Technical challenges
• Competition details
• Questions on the competition
DSTL/PUB81972
25 June 2014

OFFICIAL
Introduction to competition
DSTL/PUB81972
25 June 2014

OFFICIAL
Military interest in additive manufacturing
• Additive manufacturing is likely to be a game changer for the
military across a wide range of areas
25 June 2014
DSTL/PUB81972
Procurement
Compression of the time and cost to go from
prototype to in service evaluation. IP!
Logistics
Manufacturing bespoke or long lead time parts
closer to point of use. Improvements in repair and
maintainability.
Equipment
optimisation Lighter weight platforms due to design freedom.
Enhanced
functionality Doing things in a radically different way!

OFFICIAL
MOD strategy on additive
manufacturing
“To openly state the MOD position and direction on the
use of additive manufacture processes, tools and
techniques…...”
1. operational & requirements
2. technical
3. commercial
DSTL/PUB81972
25 June 2014

OFFICIAL
How can you demonstrate
enhanced functionality?
• Disruptive advances in military
equipment could include:
– Combination of functions eg
power or electronics forming part
of the structure or casing
– Modular, generic architectures to
enable interoperability
– Bespoke ‘design for mission’
structures or systems
OFFICIAL25 June 2014
DSTL/PUB81972
Additive manufacturing = key enabler

June 2014
The maritime environment
Lt Cdr Ben Dillon RN

June 2014
Scope
• The maritime environment
• 3D additive manufacture:
- Increased flexibility
- Increased maintenance instrumentation
- Forward repair and manufacture
- Humanitarian and disaster relief

June 2014
• Naval operations

June 2014
• Sustainability - forward deployed

June 2014
• Evolving requirements v. design constraints

June 2014
• Evolving requirements v. design constraints
• Damage repair

June 2014
3D additive manufacture
• Flexibility
http://subseaworldnews.com/2013/05/09/liquid-robotics-
shows-sharc-sv3-at-imdex-asia/

June 2014
• Flexibility

June 2014
• Flexibility
• Improved maintenance instrumentation

June 2014
• Flexibility
• Platform / task group maintenance & repair

June 2014
• Flexibility
• Platform / task group maintenance & repair
• Humanitarian and disaster relief

OFFICIAL
Technical challenges
DSTL/PUB81972
25 June 2014

OFFICIAL
Challenge 1 – embedded sensors
DSTL/PUB81972
25 June 2014
Can additive manufacturing
improve the integration of
sensing capability?

OFFICIAL
Challenge 2 – embedded
rechargeable power sources
DSTL/PUB81972
25 June 2014
Can additive manufacturing help reduce the burden on
these through integrating rechargeable power
(batteries, solar etc) into military equipment?
Credit: Lead holder wikimedia

OFFICIAL
Challenge 3 – integrated electronics
DSTL/PUB81972
25 June 2014
We can’t do all of this –
but what can be done
that would provide
military benefit?
Would build-for-purpose bespoke
electrical connections enable enhanced
interoperability between equipment?
Credit: balurbala wikimedia

OFFICIAL
Challenge 4 – integrated novel
camouflage or stealth technologies
DSTL/PUB81972
25 June 2014
Can additive manufacturing enable the easy integration of
stealth technologies onto platforms?
Credit: Nick Hobgood wikimedia

OFFICIAL
Challenge 5- rapid build
DSTL/PUB81972
25 June 2014
How can additive manufacturing enable bespoke for
mission unmanned vehicles across all domains?

OFFICIAL
Challenge 6 – mimicking biological
systems
DSTL/PUB81972
25 June 2014
How can additive
manufacturing help
make better functional
simulants for testing?
Credit: Niabot wikimedia

OFFICIAL
Competition specifics
DSTL/PUB81972
25 June 2014

OFFICIAL
Important information
• Competition is a 2-phase approach
• Phase 1:
– Phase 1 will be contracted through CDE
– Phase 1 bids must describe the scope of a potential
phase 2
– Phase 1 deliverables must include a more detailed
costed proposal for phase 2 to be eligible for follow-
on funding
DSTL/PUB81972
25 June 2014

OFFICIAL
Important information
• Phase 2:
– Promising concepts from phase 1 may be selected
for phase-2 funding, contracted through Dstl
– Dstl does not commit to fund any follow-on work,
but will consider phase-2 proposals at a second
decision conference at the end of phase 1
DSTL/PUB81972
25 June 2014

OFFICIAL
Funding and technology readiness
levels (TRLs)
Phase Total
anticipated
budget
Typical
project
funding
Typical
project
duration
Typical
TRL
1 £750 k £40 k -
£80 k
6-8 months 3-4
2 £1.5 M £200k -
£300k
12-24
months
5-6
DSTL/PUB81972
25 June 2014
For a description of TRLs see the Acquisition Operating
Framework https://www.gov.uk/acquisition-operating-framework

OFFICIAL
Important dates
• Competition close date - 28 August 5pm BST
• Phase-1 projects complete by 30 June 2015
• See competition document for full list of dates for both
phases
DSTL/PUB81972
25 June 2014

OFFICIAL
Opportunities for further questions
• Webinar on 4 July 2014
• Technical queries can be sent to diet@dstl.gov.uk
– “Additive manufacturing” as a prefix in the title
• Funded projects will have opportunities to participate
in project showcases after each phase
DSTL/PUB81972
25 June 2014

24 June 2014: additive manufacturing CDE themed competition briefing

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Semelhante a 24 June 2014: additive manufacturing CDE themed competition briefing

Semelhante a 24 June 2014: additive manufacturing CDE themed competition briefing (20)

Mais de Defence and Security Accelerator

Mais de Defence and Security Accelerator (20)

Último

Último (20)

24 June 2014: additive manufacturing CDE themed competition briefing