1. 1
1
Jayson A. Oraa
Al Satwa Road, Al Badaa Service Road, Satwa, Dubai, United Arab Emirates.
E-mail: jasonoraa@yahoo.com
Tel. +971-507137158
Objective Seeking in the Progressive career in the field of QA/QC with a professionlly managed growing
company utilizing my qualifications experience in order to grow along with the company
Experience profile QA/QC Engineer ( February 2016 up to present)
Client: Nakheel
Main Contractor: Al Futtaim Carrilion
Project: W-hotel & Residence palm Jumeirah, dubai
Company: Emirates water tech. landscape, swimming pool & waterfeature
To coordinate with construction crew for on‐going civil/structural activities, including but
not limited to excavation, backfilling, compaction, rebar inspection, formwork inspection,
Field Density Test, concrete pouring, etc.
To review the relevant documents prior to start of construction e.g. IFC, project
specification etc.
Must be able to do inspection of structural steel fabrication, erection till final inspection.
Must have experience in Pre‐engineered building erection.
To initiate the RFI’s for Client’s witness of inspection points as per ITPs.
To be more proactive to construction crew for advising to correct the activities this could
lead to non‐conformance.
Be vigilant for upcoming scheduled activities in advance to coordinate with 3rd parties in
advance for the activities require testing e.g. FDT, Concreting etc.
To coordinate with surveyor to finalize the bench mark survey setting out prior to start of
construction.
QA/QC- MEP Engineer ( October 2015 to February 2016)
Client: Dubai Parks & Resorts
Project: Raj Mahal Bollywood Theater,
Company: Emirates Technical and Thermal System
To perform specialist QAQC techniques on critical structures and processes.
To report deviations from approved plans and specifications
To coordinate inspections with Consultant / Client and to communicate with production
team
To review all materials received on the site, inspecting them, ensuring they are as per
approval.
To conduct testing within the required specification and to monitor frequency of testing.
To attend and participating in QAQC meetings.
To work with the Lab Coordinator to conduct tests as per the project specification.
To proactively supervise the closure of NCR’s, suggesting innovative ideas for
improvement.
2. 2
2
Verify the accuracy of shop drawings and their compliance to the specification,
consultant’s design and existing local authority standard.
Coordinate with other project personnel to ensure that deadlines, procedures, and other
project requirements are met.
Method Statement preparation
Operation Maintenance Manual Preparation
QA/QC- MEP-( February 2014 to October 2014)
Client: Emaar Properties
Project: LA CASA COMMUNITY – 253 VILLAS ARABIAN RANCHES Dubai United Arab Emirates
Company: Emirates Technical and Thermal System
To assist QAQC Manager to prepare project reports.
To perform specialist QAQC techniques on critical structures and processes.
To report deviations from approved plans and specifications
To coordinate inspections with Consultant / Client and to communicate with production
team
To review all materials received on the site, inspecting them, ensuring they are as per
approval.
To conduct testing within the required specification and to monitor frequency of testing.
To attend and participating in QAQC meetings.
To work with the Lab Coordinator to conduct tests as per the project specification.
To proactively supervise the closure of NCR’s, suggesting innovative ideas for
improvement.
QA/QC- MEP-( June 2013 to February 2014).
Client: ADAC- Abu Dhabi Airports Company
Project: Airport Terminal 3 Expansion – Abu Dhabi United Arab Emirates
In-charge for overseeing all MEP QA/QC work
Ensure the electrical/mechanical work carried out is as per approved shop drawing and
within the time frame and progress of the approved construction program.
Ensure that the installation, inspection and testing of all the electrical/mechanical
equipment, fittings and work implemented meets the specification and the consultant
requirements
Verify the accuracy of shop drawings and their compliance to the specification,
consultant’s design and existing local authority standard.
Coordinate with other project personnel to ensure that deadlines, procedures, and other
project requirements are met.
Preparing Inspection Request
Preparing Operation Manual
QA/QC Engineer – May 2010 –May 2012
Company: Methac Contracting Company
Address: Jeddah Kingdom Saudi Arabia.
Responsibility:
Ensure that all current issues concerning procedures, approved materials, shop
drawings, and standards are available at the point of use.
3. 3
3
Ensure workers are trained on correct and approved method of installation.
Ensure that the work comply with the contract requirements / approved shop
drawings.
Inspect for any material damages during handling, storage and installation.
Ensure that the work is completed and inspected prior to the initiation of the
Inspection Test Request (ITR) for Consultant’s approval.
Maintain comprehensive inspection and test records for further references.
QA/QC Engineer – June 2008 – Nov 2009
Company: Sgs landscaping contracting company
Address: Dasamrinas cavite city.
In-charge for overseeing all Civil & MEP QA/QC work
2. Ensure the electrical/mechanical work carried out is as per approved shop drawing and
within the time frame and progress of the approved construction program.
3. Ensure that the installation, inspection and testing of all the electrical/mechanical
equipment, fittings and work implemented meets the specification and the consultant
requirements
4. Verify the accuracy of shop drawings and their compliance to the specification,
consultant’s design and existing local authority standard.
5. Coordinate with other project personnel to ensure that deadlines, procedures, and other
project requirements are met.
QA/QC Inspector– july 16 2003 – October 2005
Company: Filipinas Bravo Corporation- Consulting Engineering Services
Address: Mandluyong city. Philippines
In-charge for overseeing all QA/QC work
2. Ensure the electrical/mechanical work carried out is as per approved shop drawing and
within the time frame and progress of the approved construction program.
3. Ensure that the installation, inspection and testing of all the electrical/mechanical
equipment, fittings and work implemented meets the specification and the consultant
requirements
4. Verify the accuracy of shop drawings and their compliance to the specification,
consultant’s design and existing local authority standard.
5. Coordinate with other project personnel to ensure that deadlines, procedures, and other
project requirements are met.
Preparing Inspection Request
Preparing Operation Manual
4. 4
4
Education B.S. Computer Engineering (‘ 98-2001’)
AMA Computer University - Philippines
Knowledgeable
Skills & Technical
Computer Literate, Well experienced on Microsoft Windows Environment: MS Office (Lotus,
Word, Excel, Access, Power Point), Microsoft Networking, Photoshop, sketchup, Web Designing,
Data Processing & other computer aided works.
Personal Data Date of Birth : 06 December 1979
Age : 35
Reference
Nationality : Filipino
Marital Status : Married
Passport No. : EB0080274
Mr. Leo Gonzales
Landscape architect
Nakheel – Dubai, UAE
I hereby certify that the above information is true and correct to the best of my knowledge.