With the objective of providing total solution in the area of fluid dispensing and UV curing, Technodigm focus on research and development to build high quality standard platforms to serve customers in various industries. These standard platforms enable users to concentrate on process and product development, and relieve them from finding solutions for complex dispensing and UV curing processes. Technodigm works with industry material suppliers to better understand material characteristics and application requirement. This provides us with good knowledge and experience to create dispensing platforms that are not only user-friendly, but are also able to handle a wide range of materials with different properties and characteristics. Further research into latest UV technologies enables us to develop effective and powerful UV curing systems to cater to applications that require fast curing to achieve process optimization. Our dispensing equipment ranges from simple table-top dispensing controllers to fully integrated robotic systems. Each system is designed to meet customer's requirement on volumetric consistency, high throughput, low maintenance, and with a reasonable cost. We provide not only table top models and stand-alone systems, but also fully integrated in-line platforms. Our UV curing equipment caters primarily to processes that require curing of UV adhesives. Due to the fast curing characteristic of UV adhesive, it has become the preferred material for processes that require fast curing, either for achieving quick fixing of positions, or to achieve high throughput. To cater to different product and process nature, we provide 3 key types of UV equipment; the spot cure, flood cure as well as conveyorized curing system. With the above range of products, we aspire to be one of the very few companies in this industry to be able to provide total solutions to our customers involved in fluid handling processes.

1. Bringing Dispensing and UV Technology
To Another Paradigm
Untitled-1 3 8/27/12 10:31 PM
7/6/12 3:53 AM

2. about TechnoDigm
With the objective of providing total solution in the area of fluid dispensing
and UV curing, Technodigm focus on research and development to build
high quality standard platforms to serve customers in various industries.
These standard platforms enable users to concentrate on process and
product development, and relieve them from finding solutions for complex
dispensing and UV curing processes.
Technodigm works with industry material suppliers to better understand
material characteristics and application requirement. This provides us with
good knowledge and experience to create dispensing platforms that are
not only user-friendly, but are also able to handle a wide range of materials
with different properties and characteristics. Further research into latest
UV technologies enables us to develop effective and powerful UV curing
systems to cater to applications that require fast curing to achieve process
optimization.
Our dispensing equipment ranges from simple table-top dispensing
controllers to fully integrated robotic systems. Each system is designed to
meet customer’s requirement on volumetric consistency, high throughput,
low maintenance, and with a reasonable cost. We provide not only table
top models and stand-alone systems, but also fully integrated in-line
platforms.
Our UV curing equipment caters primarily to processes that require curing
of UV adhesives. Due to the fast curing characteristic of UV adhesive, it has
become the preferred material for processes that require fast curing, either
for achieving quick fixing of positions, or to achieve high throughput. To
cater to different product and process nature, we provide 3 key types of UV
equipment; the spot, flood as well as conveyorized curing system.
With the above range of products, we aspire to be one of the very few
companies in this industry to be able to provide total solutions to our
customers involved in fluid handling processes.
Untitled-1 4 Catalogue cvr.indd 2
Technodigm 8/27/12 3:53 PM

3. Contents
Dispensing Systems 2 Dual Component Dispensing Systems 15
Liquid Dispenser AD2000 Meter Mix Dispensing System
Digital Dispenser DD2500 Dual Cartridge Dispenser DC50P
Precision Digital Dispenser DD3500
Positive Displacement Pump PDP1000 Material Loading Stations 16
Peristaltic Pump Dispenser PP1000
Syringe Loader SL1000
Programmable Digital Dispenser PD4000
Cartridge Loader CL1000
Dispensing Valves 5
Tanks & Pumps 17
Diaphragm Valve DV100, DV200T & DV200P
Pressure Tanks
Needle Valve NV100 & NV200
Pressure Pumps
Poppet Valve PV100, PV200H & PV200V
Spool Valve SPV100
Dispensing Accessories 19
Plunger Valve PLV100
Snuff Back Valve SBV100 Barrels & Accessories
Positive Displacement Valve PDV100 Tips & Needles
Digital Valve Controller DD2000VC Cartridges & Accessories
Precision Piston Valve and Controller NV300 & NVC3000
Auger Valve & Controller AV5000 UV Curing Systems 21
UV Spot Curing UVSPOT
Desktop Dispensing Robots 9 UV Point UVP
Desktop Robots UV Conveyor UVC2000
Gantry Robots GR3000 UV Bench Top Conveyor UV6
UVRay UVR400/600
Automatic Dispensing Systems 11 UVRay UVR800
UV Mini Ray UVMR400
In-line Dispensing System ILS3000
UV Flood UVF400/600
Integrated Dispensing System IDS1000
Automatic Spray Coating Systems 13
Spray Coating System SCS4000
Spray Valve & Controller SV300 & SVC1000
www.techno-digm.com
Technodigm Catalogue.indd 1 7/3/12 10:08 AM

4. Dispensing Systems
Liquid Dispenser AD2000
The AD2000 is a versatile automatic liquid dispenser which is perfectly suited for dispensing a wide variety of materials.
From minute dots of grease to larger volumes of potting materials and silicones, the AD2000 is able to accurately
dispense the desired amount of material. The fine “suck-back” adjuster allows precise and effective control of
dripping when dispensing low viscosity materials. The optional stainless steel one-touch, push-in connector allows easy
attachment of the barrel adaptor with minimal wear and tear.
Features
• Can be used with a wide range of materials
• Fine suck-back adjuster
• Foot pedal or robot-controlled dispensing
Specifications
Selectable Time Range 0.005 – 30sec
Best Achievable Cycle Time 0.1 sec/cycle
Supply Air Pressure 5 – 7 Bar, 70-100 PSI
Output Air Pressure 0.1 – 7 Bar, 1.5-100 PSI
Vacuum Pressure 0.1 – 1 Bar, 1.5-100 PSI
Power 220 VAC
Size 250 X 163 X 68mm
Weight 2.8kg
Digital Dispenser DD2500
With a digital display for time and pressure, DD2500 Digital Dispenser offers users digital time and pressure control for a
more accurate dispensing output. DD2500 also allows users to save and recall up to 10 different programs.
Features
• Digital display of dispensing time
• Digital display of precise pressure control
• Bright LCD
• 10 Memory Locations to automatically cycle 10 user-
taught programs
• Auto cycling mode allows sequencing of a self-taught
program which includes a preset dispense time and
wait duration between cycles
• Manual mode allows user to control precise timing for
dispensing
• Auto mode allows user to preset timing for dispensing
• Convenient operation via foot pedal or front panel
button
• Adjustable suck-back feature
• Complete with accessory dispensing kits
Specifications
Size 130 X 130 X 140mm
Dispense Time 0.005 – 999.999sec
Operation Modes Manual, Auto, Cycle
Internal Memory 10 Memory Locations
Power 110/220VAC
Air Input 5 – 7 Bar, 70~100 PSI
Air Output 0.1 – 7 Bar, 1~100 PSI
Weight 1.8kg
2
www.techno-digm.com
Technodigm Catalogue.indd 2 7/3/12 10:08 AM

5. Precision Digital Dispenser DD3500
When highly accurate dispensing is required, the DD3500
with its precision digital pressure control system can be used.
Incorporating a high precision air regulator with digital read-outs
for both the feed and vacuum pressure settings, together with
digital time control, allows the DD3500 to be fine-tuned to suit
even the most demanding dispensing application.
Features
• Precision pressure control
• Digital display of Pressure and Vacuum settings
• Various selectable display of Pressure units: MPa/kPa, Specifications
kfg/cm3, bar, psi, mmHg, inHg Control Method Microprocessor controlled
• Allow storage for 10 timer-controlled programs Pneumatic Control Precision
• Easy entry of dispensing parameters through front regulator control
panel keyboard Digital ON/OFF Air control
• Simple call of programmed dispense parameters Constant/Pulse vacuum control
• Selection of constant ON/time-control-pulsing for Display Section LED Program No. and Digital
vacuum control Timer Display
• 2 modes of operations: Manual and Auto Digital pressure output display for
• Timer indication for Manual and Auto mode (00.000 air output and vacuum
to 99.999) Selectable display of unit for
• Allow pedal control or press button control of pressure output
dispensing action Memory Function 10 Programs
• Optional Level Sensor & Buzzer for low material level Input/Output Signal Opto-coupler
sensing Supply Pressure Max 10 Bar
• Enhanced feature: stabilize pressure for air output Power 110/220VAC
Power Consumption 45W
Positive Displacement Pump PDP1000
PDP1030/PDP1010 is designed to be different from other dispensers. It utilized direct drive mechanism to deliver precise
amount of epoxy air free. It can be used on any type of epoxy/adhesive that is package in standard 30 and 10cc
industrial barrel. It is especially useful for volumetric dispensing of short pot life material because no moving parties in
contact with the epoxy/adhesive. This ensures that no material will be dried or cured within the equipment. Therefore
it requires little or no maintenance.
PDP1030/PDP1010 is a truth volumetric dispenser because it dispenses the exact volume of programmed epoxy/
adhesive. It is not influenced by the change in viscosity nor is it influenced by any air pressure change. Built in features
ensure that there will be no dripping or drooling of material after dispensed.
Designed to be mounted on dispensing robots, it comes with an easy use and features packed controller, PDP1000.
The controller allows users to enter the volume to be dispensed in a couple of ways. Controlled by microprocessor, it
allows the saving of up to 9 programs.
Features
• Volumetric Dispensing up to 2 – 5% tolerance (depends on the type
• of material.)
• Microprocessor Control (Micro stepping)
• LCD Display
• Easy Programming
• No dripping or drooling of material after dispensed
Specifications
Dispense Resolution 0.001mm (0.0004/ 0.0001cc on a 30/10cc Syringe)
Dispensing Speed Adjustable from 0.5mm/sec (depending on models)
Low Level Sensing Audio Alarm and Automatic Retract
Material Level Graphical display on LCD
Stored Programs 9
Dispensed Volume Direct setting/Stroke setting
Weight(Valve) 1.45kg
Weight(Controller) 3.2kg
* Will be influenced by material used, syringe type/packaging and volume dispensed.
www.techno-digm.com 3
Technodigm Catalogue.indd 3 7/3/12 10:08 AM

6. Peristaltic Pump Dispenser PP1000
The PP1000 Peristaltic Pump Dispenser is perfectly suited to dispense low viscosity materials such as cyanoacrylate glue,
UV adhesives, alkalines, acids, oils and solvents. The system works by applying a controlled positive pressure on the tube
carrying the material. No air pressure is required as the pressure to push out the material is supplied by a turning rotor.
Features
• Air-free dispensing
• Direct dispensing from bottle/container
• Manual or timed dispensing intervals
• 10 step variable pump speed to adjust flow rate
• Reversible pump flow for “vacuum suck-back” &
maintenance
• Consistent dispensed volume
Specifications
Size 190 X 184 X 94mm
Weight 4kg
Power 220VAC
RPM 0-200
Dispensing Range 0-6500 Pulse
Vacuum Range 0-3sec
Shot Size Min 0.0001cc
Viscosity Range Below 10,000 cps
Programmable Digital Dispenser PD4000
Dispensers typically have some difficulty with maintaining a consistence dispensed volume over the entire syringe
of material. Generally the dispensed volume drops as the volume of material decreases in a syringe. How serious
a problem depends on factors like viscosity, dispensed volume, needle sizes etc. PD4000 is designed with feedback
mechanisms that allow it to automatically compensate to rectify the reduction in dispensed volume. It is simple to use
and does not require any special setting or other inputs.
For material that changes viscosity over time, there is a feature that allows user to program pressure changes over
time. Memory functions allow the saving of up to 4 of such program. This function is most suitable for two component
materials.
Features
• Automatic Feedback (for compensation of
dispensing volume).
• Programming of pressures for viscosity changes over
time.
• Micro-Processor control
• Easy to use and no maintenance
• Selection of Bar/PSI for dispensing pressure
• Selection of constant ON/time-control-pulsing for
vacuum control
• Timer indication for Manual and Auto (Timer) Mode
Specifications
Control Method Electro-Pneumatic System
Pneumatic Control Automatic digital air pressure
control
Constant/Pulse vacuum control
Dispensing Pressure Up to 7 Bar/100psi
Dispensing Time 0.01 – 999.99 sec
Display Section LED digital display
Memory Functions 99 Programs plus 4 for pressure/
time programming
Supply Air Pressure > 1 Bar above dispensing pressure
Power 110-220VAC
4
www.techno-digm.com
Technodigm Catalogue.indd 4 7/3/12 10:08 AM

7. Dispensing valves
Diaphragm Valve
Diaphragm Valve is designed for low to medium viscosity material such as light-curable
adhesives, anaerobic adhesives, cyanoacrylates, epoxies, fluxes, inks, paints, and solvents.
In this design, fluids do not contact the actuating components within the dispensing valve,
making it ideal for dispensing reactive materials such as cyanoacrylates and solvent-
based products.
DV100 DV200T DV200P
Operating Air Pressure More than 4.0Kgf/cm² More than 4.0Kgf/cm² More than 4.0Kgf/cm²
Material Delivery Pressure Max 5.0Kgf/cm² Max 6.0Kgf/cm² Max 6.0Kgf/cm²
Maximum number of cycles 500 cycles/min 400 cycles/min 400 cycles/min
Flux (KV Valve) 0.3L/min 0.3L/min 0.3L/min
Viscosity 1~5,000 cps 1~50,000 cps 1~50,000 cps
Weight 76g 200g 200g
Material Low Viscosity Liquid (Reagent, Solvent, Low-Middle Viscosity Low-Middle Viscosity Liquid (for small
CA, Anaerobic Adhesive, Flux, Ink) Liquid dot), Solvent, Silicone oil, UV adhesive
Needle Valve
Needle Valve can be used for a wide range of material; from low to high viscosity fluid
material such as light-curable adhesives, solvents, inks, lubricants, and silicone oils. This
needle valve offers extreme accuracy, whether dispensing beads or shots, and is easily
integrated into high-volume automation.
NV100 NV200
Operating Air Pressure More than 4.0Kgf/cm² More than 4.0Kgf/cm²
Material Delivery Pressure Max 6.0Kgf/cm² Max 6.0Kgf/cm²
Maximum number of cycles 400 cycles/min 300 cycles/min
Flux (KV Valve) 1.7L/min 0.4L/min
Viscosity 1,000~100,000 cps Any Viscosity
Weight 180g 316g
Material Low-Middle Viscosity Liquid (Solvent, Silicone oil, Epoxy) Low-High Viscosity Liquid
Poppet Valve
Poppet Valve is recommended for medium to high viscosity fluid material such as epoxy
adhesives, grease and RTV silicones. The poppet valve’s design minimizes friction between
the valve’s inner parts and the fluid.
PV100 PV200H PV200V
Operating Air Pressure More than 4.0Kgf/cm² More than 4.0Kgf/cm² More than 4.0Kgf/cm²
Material Delivery Pressure Max 6.0Kgf/cm² Max 6.0Kgf/cm² Max 6.0Kgf/cm²
Maximum number of cycles 300 cycles/min 200 cycles/min 300 cycles/min
Flux (KV Valve) 2.4L/min 1.2L/min 1.2L/min
Viscosity 1,000 ~150,000 cps 1,000 ~50,000 cps 1,000 ~50,000 cps
Weight 285g 162g 82g
Middle-High Viscosity Liquid, (RTV Middle-High Viscosity
Material Middle-High Viscosity Liquid
silicone, Epoxy, Grease) Liquid
www.techno-digm.com 5
Technodigm Catalogue.indd 5 7/3/12 10:08 AM

8. Spool Valve
Spool valve is recommended for light-curable adhesives, gasket materials, greases, RTV, and silicones. This spool valve
is ideally suited for low-to-high viscosity materials. Operating with higher pressures, these dispensing valves are capable
of dispensing higher viscosity fluids in controlled, continuous beads and patterns.
SPV100
Operating Air Pressure More than 4.0Kgf/cm²
Material Delivery Pressure Max 5.0Kgf/cm²
Maximum number of cycles 400 cycles/min
Flux (KV Valve) 5.0L/min
Viscosity 1~1,000,000 cps
Weight 255g
Material Low-High Viscosity Liquid
Plunger Valve
Plunger valve is a positive displacement valve designed to dispense constant volume of low to medium viscosity
materials such as oil, electrolytes and ink.
PLV100
Operating Air Pressure More than 4.0Kgf/cm²
Material Delivery Pressure Max 0.3Kgf/cm²
Maximum number of cycles 120 cycles/min
Flux (KV Valve) 0.005 ~ 0.015cc/cycle
Viscosity Low Viscosity
Weight 320g
Material Low Viscosity Liquid (Oil, Electrolyte, Ink)
Snuff Back Valve
SBV100 is a snuff back valve. The action of this valve is such that on the retraction of the piston, a “negative pressure”
is created to “pull back” the material so as to achieve a quick cut off and or prevent dripping of material. This valve is
suitable for a wide range of material but is especially good for grease, silicone and pasty materials. Easy to maintain
and operate, this valve is economical and robust.
SBV100
Operating Air Pressure From 2.0Kgf/cm²
Material Delivery Pressure Max 7.0Kgf/cm²
Maximum number of cycles 300 cycles/min
Flux (KV Valve) 3.8L/min
Viscosity Medium to high
Weight 320g
UV adhesive, epoxies, silicone paste, SMT
Material
adhesive etc
6
www.techno-digm.com
Technodigm Catalogue.indd 6 7/3/12 10:08 AM

9. Positive Displacement Valve
PDV 100 can be used as a positive displacement valve for dotting processes. It is designed such that with an appropriate
combination of fluid pressure and fast closing time, a consistence amount of material can be achieved repeatedly.
However if line dispensing is what is needed, this valve can also be used. Wetted chamber are of stainless steel with
Teflon seals.
PDV100
Operating Air Pressure More than 4.0Kgf/cm²
Material Delivery Pressure Max 0.3Kgf/cm²
Maximum number of cycles 120 cycles/min
Flux (KV Valve) 0.003 ~ 0.018cc/cycle
Viscosity Medium to high
Weight 305g
Material UV adhesive, epoxies, silicone paste, SMT adhesive etc
Digital Valve Controller DD2000VC
The DD2000VC is specifically designed to be used with single or double acting valves. Both valve and syringe can be
connected to the DD2000VC’s output. Only one air input is required, resulting in a neater workstation.
Features
• Bright LCD
• 10 Memory locations to automatically cycle 10 self-taught programs
• Auto cycling mode allows sequencing of a self-taught program control operation of valve continuosly
• Manual mode allows user to control precise ON/OFF timing of double acting valve
• Auto mode allows user to preset ON/OFF timing for control of double acting valve
• Convenient operation via foot pedal or front panel button
• Additional adjustable air pressure for constant supply to syringe
• Digital display of precise pressure control
• Complete with accessory dispensing kits
Specifications
Size 130 X 180 X 140mm
Dispense Time 0.005 – 999.999 sec
Operation Modes Manual, Auto, Cycle
Internal Memory 10 Memory Locations
Power 120/220VAC
Air Input 5 – 7 Bar, 70-100 PSI
Air Output 0.1 – 7 Bar, 1 – 100 PSI
www.techno-digm.com 7
Technodigm Catalogue.indd 7 7/3/12 10:08 AM

10. Precision Piston Valve and
Controller NV300 & NVC3000
NV300 is a dedicated valve designed for small volume dispensing
applications. It can be used for dots, lines, potting or any applications that
requires good volume precision. It has a good positive shut off that also
enables it to dispense without dripping. Maintenance is relatively easy and
all wetted parts are made of stainless steel. NV300 works with a controller,
NVC3000. When connected to the NV3000, all the parameters necessary for
good control and dispensing can be set.
NVC3000 is a micro processor based controller. It has a LCD screen for display
and a simple menu. It has both auto (with digital timing) and manual mode.
Features of Valve NV300 Specifications of Valve NV300
• Good positive shutoff Voltage 24VDC Input Board-Level Driver
• No dripping Cycle time 600cycle/min
• Stainless Steel Wetted Parts Operating Air 4kgf/cm2
• Especially good for not heavily filled epoxy and Material Pressure 7.0kgf/cm2 (Max)
adhesive. Viscosity Low/High
• Easy Maintenance On/Off Piston
• Good volumetric dispensing Wetted Part Stainless steel
Weight 490g
Features of Controller NVC3000 Specifications of Controller NVC3000
• LCD Display Time Range 0.02 to 99.999 sec
• 10 Memory Voltage 110/220 VAC
• Auto cycling Input Pressure Up to 100 psi
• Manual/Timer mode Operation Mode Manual, Auto, Cycle
• Digital Timing Internal Memory 10 Memory Locations
• Microprocessor Driven Response Time 100ms
• No maintenance Size 133 x 131 x 146mm
• User-friendly Programming Weight 2kg
Auger Valve & Controller AV5000
Auger Dispensing Valve is designed for dispensing applications which
requires good volumetric accuracy. It incorporates a precision motor,
which provides high and consistent torque to dispense medium to very
high viscosity paste effortlessly. As a precision fluid dispensing valve,
it is capable of dispensing micro shots as well as beads. This makes it
a versatile tool for applications involving a wide range of adhesives,
solder paste and epoxies (including greases and silicones). AV5000 is
highly suitable for applications like DIE Attach, Sealing, Dotting and
Encapsulation.
Features of Valve Specifications of Valve
• High Torque Voltage: 24VDC Input Board-Level Driver
• Stainless Steel Wetted Parts Motor: 5 Phase stepper motor
• Different Screw Pitches (8, 16, 32) Resolution: 0.1 deg
• Easy Maintenance Shot size (min) (material dependant)
• Accommodate Various Syringe Sizes Syringe Sizes: 3CC, 5CC, 10CC, 30CC, 55CC
• Accommodate Standard Dispensing Needles
• Fast Start-up & Stop
Features of Controller Specifications of Controller
• Adjustable Reverse Time Time range 0.01 to 99.99 sec
• Adjustable Material Input Pressure Voltage 90V to 264V AC,Single Phase
• User-friendly Programming Input Pressure up to 100 PSI
• Storage of up to 12 program parameters I/O 25
• Activation by Foot Switch/Touch Screen External Interface RS232
• Low-level Fluid Detection(optional. Requires external Response Time 100ms
sensor)
• Auto Calibration & Fine Tuning
8
www.techno-digm.com
Technodigm Catalogue.indd 8 7/3/12 10:08 AM

11. Desktop Dispensing Robots
Desktop Robots
Desktop robots provide an easy way to automate numerous
dispensing processes while preserving desktop workspace. The
increased efficiency and quality provided by these desktop robots
help to improve production output turnover while reducing the
number of rejected parts.
Model DR 3221 DR 3331 DR 3441 DR 4331 DR 4441
Items Number of Axis 3 3 3 4 4
X, Y axis 200 x 200 300 x 300 400 x 400 300 x 300 400 x 400
Stroke (mm) Z axis 100 100 100 100 100
R axis NA NA NA ±360° ±360°
Work 7Kg 10Kg 10Kg 10Kg 10Kg
Payload(kg)
Tool 5Kg 6Kg 6Kg 4Kg 4Kg
X, Y axis 500(5~500) 500(5~500) 500(5~500) 500(5~500) 500(5~500)
Speed (mm/s) Z axis 250(2.5~250) 250(2.5~250) 250(2.5~250) 250(2.5~250) 250(2.5~250)
R axis N.A. N.A. N.A. 600°/sec(6~600°) 600°/sec(6~600°)
X, Y axis ±0.02mm ±0.02mm ±0.02mm ±0.02mm ±0.02mm
Repeatability(mm) Z axis ±0.02mm ±0.02mm ±0.02mm ±0.02mm ±0.02mm
R axis N.A. N.A. N.A. ±0.02° ±0.02°
Dimension (mm) WxDxH 396 x 494 x 610 635 x 686 x 736 735 x 786 x 736 635 x 686 x 736 735 x 786 x 736
Weight (kg) 28 35 38 38 41
Voltage/ Frequency AC220V(-15%~ +10%)(single phase), 50/60Hz
Power Source
Capacity (kva) 500[VA]
Type Step motor / 5 Phase (TS3624N2E4)
Motor
Operation Micro Step
Input power[V] 48
Power amplifier
Output power [A] Max 1.5 per axis
Program input Teaching Pendant (iMT - ∑), PC(IBM compatible)
Program data input MDI (Manual Data Input), Direct teaching, Touch panel
Motion Control PTP, CP (3dimensional straight line/ circular arc interpolation)
Point Files 100 files
Program Capacity
Points 1,000 points per file
PLC Command 20 sets (AND, OR, NOT, TIMER, COUNTER etc.)
Serial Communication RS232C(19,200bps), RS422/RS232C(9,600 to 38,400bps)
I/O(Input/Output) Standard: 16(IN) / 16(OUT), Extension(optional): 32(IN)/ 32(OUT)
3 dimensional palletizing, Pass&Turning motion, Teaching points shift,
Special Functions
I/O parallel processing, R axis value compensation, Real Time speed over ride.
PLC scanning time (ms) 5
User memory capacity Standard: 128kb, Extension (optional): 512kb
User memory backup FRAM
Operating ambient temperature/humidity 0-45°C / 20-80% RH
Storage ambient temperature/humidity -15-60°C / 10-90% RH
www.techno-digm.com 9
Technodigm Catalogue.indd 9 7/3/12 10:08 AM

12. Gantry Robots GR3000
GR3000, Gantry Dispensing Robot comes with servo controlled ball screw driven by servo motors. With a resolution of
less than 2μm per axis, it is designed for precision dispensing, very good accuracy and repeatability. The PC based
software comes with an interface that allows easy programming and editing. Design with flexibility to be used with
many different types of dispensing systems, these Gantry Dispensing Robots will meet most demanding applications.
Optional Fiducial and needles calibration are also available.
Features Specifications
• Cartesian-Gantry construction (non moving base) Working Area 300 X 300 X 150mm
• Digital servo controlled ball screw drives Maximum Load 6kg
Maximum Speed 600mm/sec
• I/O communications for machinery and conveyor
Repeatability +/- 10µm per axis
integration
Resolution 2µm per axis
• Longer Z axis travel and higher payloads
Program Capacity Unlimited programs
• High speed movement up to 600mm/sec
Data Memory Type Hard disk
• Composite granite base design ensures flatness,
rigidity and robustness. Processor CPU Pentium 4
• Easy to learn and program with proprietary PC Drive System AC Servo Ball Screw
software Motion Control PTP, CP
• Optional camera fiducial checks & needle calibration Linear Interpolation All axes
(X/Y module) Teaching Method Needle teach (Camera teach)
• Build in pneumatic system Power Supply 220 VAC
• Fully configurable (stand alone or in-line) Working Temperature 0-40°C
Dimension (WxDxH) 800 x 945 x 760mm
Weight 130kg (granite base)
Other models available GR2000: 200 X 200 X 150mm
(Working area) GR4000: 400 X 400 X 150mm
10
www.techno-digm.com
Technodigm Catalogue.indd 10 7/3/12 10:08 AM

13. Automatic Dispensing Systems
In-Line Dispensing System ILS3000
ILS3000 comes with servo controlled ball screw driven by servo motors. With a resolution of less than 2µm per axis, it
is designed for precision dispensing, very good accuracy and repeatability. The PC based software comes with an
interface that allows easy programming and editing. Design with flexibility and to be used with many different types
of dispensing systems, ILS will meet most demanding applications. Options are provided for user to choose only what
they need so that ROI can be attractive.
Features
• Digital servo controlled ball screw drives
• Longer Z axis travel and higher payloads
• High speed movement up to 600mm/sec
• Easy to learn and program with proprietary PC
software
• Build in pneumatic dispensing system
• Fully configurable (stand alone or in-line)
• Optional multi-stage conveyor, heater block and
controller, needle calibration and fiducial alignment
Specifications
Working Area: 300 x 300 x 150mm
Maximum Load (Z axis): 6kg
Maximum Speed: 800mm/sec (X, Y axis)
500mm/sec (Z axis)
Repeatability +/- 10µm per axis
Resolution 1µm per axis
Program Capacity Unlimited programs
Data Memory Type Hard disk
Drive System AC Servo Ball Screw
Motion Control PTP, CP
Linear Interpolation All axes
Teaching Method Needle teach (Camera teach)
Power Supply 220 VAC, single phase, 20A
Working Temperature 0-40°C
Dimension 850 X 950 X 1655 mm
Weight Approx. 350kg
Conveyor: Edge belt, single stage,
300mm x300mm (LxW) (SMEMA
standard) Max. Load: 2kg
Other models available:
ILS2000: 200 X 200 X 150mm
ILS4000: 400 X 400 X 150mm
Options
v 2-stages and 3-stages conveyor
v Heated stages including syringe heating (with
pneumatic lifter)
v Automatic needle calibration (3-axis)
v Vision system for fudicial alignment
o Camera resolution: 768 x 576 pixels
o Field of view: 7 x 5mm
o Lighting: LED
v Dual dispensing head
v Exterior bulk feed reservoir
v Specialised dispensing system
Positive displacement pump, auger valve, rotary
valve etc.
www.techno-digm.com 11
Technodigm Catalogue.indd 11 7/3/12 10:09 AM

14. Integrated Dispensing System IDS1000
IDS1000 is suitable for medium to high volume productions; it combines flexibility with practical functionality for the most
cost-effective dispensing solution.
IDS1000 is built on a dispensing platform that is designed for fast and accurate dispensing of a wide variety of materials.
It is built using the latest technology on LINEAR actuators and motors with close-loop feedback. Its accuracy and
repeatability is extremely good and will meet or exceed the specifications demanded of today’s high end dispensing
machines.
This machine is versatile enough to handle all kinds of solder paste, SMT adhesives, UV and heat curable epoxies and
2-part (dual cartridge) materials. It can come with integrated dispensing equipment or it can be configured to accept
any specific request on external dispensers or valves.
It is also available in conveyorized (3 sections, SMEMA standard) or standalone configuration. In the conveyorized
model, board width is adjusted simply by keying in the correct dimensions instead of manual adjustments.
User Oriented Software
The UOS software is based on Windows™ for easy programming and learning. It has simple user-friendly interface for
setup and production. Engineers will find it easy to program different applications and operators will find it easy to use
for production. Options and features are easily accessed on the screen. To aid programming, numerous standard
patterns like rectangles, circles and spirals are available.
The vision has features such as Reject Mark detection, Edge detection, SPC data and Dot Size measurements in
addition to standard fiducial (local and global) alignment.
Specifications
XY Accuracy 15 µm (+/-)
Z Axis Accuracy 10 µm (+/-)
XY Axis
Repeatability 5 µm (+/-)
Speed 800 mm/sec
Gantry Drive System Linear System (X/Y)
Z Axis
Repeatability 2 µm (+/-)
Speed 200 mm/sec
Encoder Resolution 0.1 µm (+/-)
Z Axis type Close loop DC servo, Ball screw
Z Sense type Mechanical probe/laser
Standard Features
Heated Zones 3
Conveyor With motorized width adjustment
Vision System Yes
Program Storage Local HD, DVD etc
Program Method Teach camera, direct input
Facilities
Power 220/240 VAC, 50/60 Hz
Air Supply 5.5 Bar, filtered
Footprint 1280 X 1440 X 1690 mm
Options
XYZ Calibration Standard
Needle Cleaner Option
Laser Height Sensor Option
Tactile Height Sensor Option
Dual Head Tooling Option
12
www.techno-digm.com
Technodigm Catalogue.indd 12 7/3/12 10:09 AM

15. Automatic Spray Coating Systems
Spray Coating System SCS4000
SCS4000 Spray Coating System is an efficient machine for applying conformal coatings for various applications. It
improves productivity by allowing the selective coating of areas without the need for time consuming masking. Quality
of spray is repeatable and coating can be applied especially thin or thick.
SCS4000 is a fully programmable selective coating system with an user-friendly proprietary software to perform any
intricate patterns that is needed for a good coating process. It also has a programmable tilt and rotate function to
access most areas. Together with the gantry system and the spray valve, the system can deliver an even coated area
with a maximum of approximately 0.01mm*.
Friendly features for area coating allows for fast programming. Dry runs after programming allows user to check
position without actual spraying. Valves are easy to service and maintain. There is no expensive replacement part.
Features
• Material and substrate dependant
• Ease of programming with PC-based Software
• Purging stations for material
• Low atomising pressure
• Strong internal exhaust with overspray chamber for
fume
• Low level sensor for material
• Material tank with low level sensor
• Vision option for Fiducial check and X/Y
programming
Specifications
Working Area 400 x 400x100mm
Under Board Clearance 60mm
PCB Edge Clearance 3 – 5mm
Conveyor Type Chain Conveyor
Conveyor Adjustment Manual
Programming Method PC Based Software
Program Capacity Unlimited
Motor AC Servo Motor
Drive System Ball Screw Drive
Maximum Speed 800 mm/sec
Resolution ±2µm per axis
Repeatability ±10µm per axis
Dual Head Dispense/Dot and Spray
Tilt & Rotate Spray only
Black Light (Inspection) 1 x 24 inch Lamp
Material Tank 2 x 5 Litre
Air Supply 5/6 Bar
Power 230VAC, 50Hz, 15Amp
Dimension (W x D x H) 1050 x 1230 x 1735 mm
Weight Approx. 600kg
Options
• Single Spray Head
• Different Work Area
• Standalone Desktop Model
www.techno-digm.com 13
Technodigm Catalogue.indd 13 7/3/12 10:09 AM

16. Spray Valve & Controller SV300 & SVC1000
SV300 is an air atomizing Spray Valve. It utilized low air pressure to break coating materials into tiny droplets and deposit
it onto any coating surfaces. Atomizing pressure can be as low as 8psi. This will ensure that coating material hitting the
coating surfaces will not “bounce’ or blown off the intended coating area. The valve comes with an extended nozzle
for dipping into solvent to prevent drying out of coating material. Any cleaning or flushing is only on the extended
nozzle assembly.
SVC1000 is a dedicated controller for spray valves. It has a comprehensive range of features for good control of the
spraying parameters. It is micro-P driven and can be easily integrated onto any existing system.
Features of Valve Specifications of Valve
• Suitable for low viscosity fast drying conformal Operating Air Pressure More than 3.0kgf/ cm2
coating Material Delivery Pressure Max 6.0kgf/ cm2
• Low atomizing air requirement Maximum Cycle Rate 400 cycles/ min (Full strokes)
• Fine adjust of coating material through a micrometer Weight 360g
• Compact Design, easy maintenance
Specifications of Controller
• Extended nozzle
Power 220VAC
Features of Controller Air Pressure Range Max 6.0kgf/cm2
• User friendly software provides simple setting of all the Spray Pressure 0 - 2 bar
necessary parameters
Valve Operating Pressure Max 6 bar
• LCD display screen
Dispensing Time Range 99.99 sec
• Microprocessor control
Valve, Operating Time 99.99 sec
• Easily integrated into any coating system
Interval Time 99.99 sec
• No maintenance needed
Operating Mode Timer/Auto Mode
Manual mode
Interval mode
Weight Approx. 4.0Kg
14
www.techno-digm.com
Technodigm Catalogue.indd 14 7/3/12 10:09 AM

17. Dual Component Dispensing Systems
Meter Mix Dispensing System
Meter Mix Dispensing Systems provide the most accurate and convenient way to mix and
dispense 2-part materials like polyurethane, epoxies and silicone. From a table top gravity fed
system to fully automated in-line systems, TechnoDigm has a Meter-Mix Dispensing System to
suit your application needs.
Two-part materials consist of a “Resin” component and a “Hardener” component. When
combined in the correct ratio, the mixture will begin to cure, with some materials curing in as
short as 10 minutes. This short curing time makes it difficult to manually mix large quantities of
material at a single go without wastage.
Meter Mix dispensing systems keep the resin and hardener separated and only combine
them at the very end in the disposable static mixers. Keeping them separated throughout the
storing and dosing process ensures that minimal material is wasted
as only the required amount of material is mixed and dispensed.
As such systems are highly customized for each kind of material and
application; please contact us for a recommendation of a meter
mix dispensing system which best suits your needs.
Features
• Apply small beads, or metered shots of a
precisely mixed 2-component material on-ratio
• Precise volumetric metering of low to high
viscosity materials
• Fast accurate mixing
• Very minimal material wastage
• Low volume shots to high volume continuous
dispensing
• Foot pedal to fully automated systems
• Single or multiple head solutions
• Ideal for Potting & Label Coating applications
Dual Cartridge Dispenser DCP50
Dual Component materials often come pre-packed in 50ml Dual cartridges. To dispense a controlled amount of material
from such package effortlessly, DC50P should be used. DC50P is a pneumatic equipment that
comes with a simple control box for the operator to start and stop the dispense cycle. Alternatively,
DC50P can be configured with AD2000 to provide automatic dispensing capability. The system
can also be configured with TechnoDigm’s Dispensing Robots for automated applications.
Features
• Easy to use and setup • Reasonably accurate volume dispensing
• Cost effective • Maintenance free
Specifications
Cartridge Size 50ml Dual Cartridge
Media Mixing Ratio 1:1/2:1
Input Pressure Max: 7 Bar
Operating Pressure Max: 6 Bar (Adjustable)
Operating Temperature 5 - 40°C
Measurements: Applicator Length 220mm, Diameter: 70mm
Manual Dispenser Length 130mm, Width: 80mm, Height: 80mm
Weight: Applicator with Stand Approx. 3kg
Control Box Approx. 0.8kg
www.techno-digm.com 15
Technodigm Catalogue.indd 15 7/3/12 10:09 AM

18. Material Loading Stations
Syringe Loader SL1000
The SL1000 Syringe Loader is designed to provide consistent filling for various types
of assembly fluid. It can accommodate barrel sizes of 3, 5, 10, 30 & 55 cc for
different manufacturers as long as the syringe has a luer lock connection.
It is meant to be used in conjunction with a pressure pump to transfer high viscosity
materials from a can into syringe of different sizes for easy dispensing. The SL1000
increases productivity and has no material wastage. Furthermore, it saves money
and time spent on manual loading syringes.
The SL1000 is most suitable for grease, lubricants and high viscosity material loading
works best for straight walled can/pails sizing from 1kg can to 20kg pails.
Features
• Consistent volumetric filling of various types of fluid
• Easy adjustment of filling volume
• Accommodates 3cc to 55cc syringes
• +/- 2% (by weight) repeat fill accuracy
• Positive cut-off
• Syringe Presence sensor
• Push button or foot-pedal operation
Specifications
Dimension 325 X 220 X 680mm
AC Input 85~132 VAC / 170~264 VAC
Fuse 1A
Pneumatic Air Input Max 9.9 Bars
Repeat Fill Accuracy +/-2% (by weight)
Syringe Sizes 3cc, 5cc, 10cc, 30cc, 55cc
Cartridge Loader CL1000
The CL1000 Syringe Loader is designed to provide consistent filling for various types
of assembly fluid. It can accommodate cartridge sizes of 6 oz and 12 oz from
different manufacturers. It is meant to be used in conjunction with a pressure
pump to transfer high viscosity materials from a can into cartridge of different
sizes for easy dispensing. The CL1000 increases productivity and has no material
wastage. Furthermore, it saves money and time spent on manual loading.
The CL1000 is most suitable for grease, lubricants and high viscosity material
loading works best for straight walled can/pails sizing from 1kg can to 20kg pails.
Features
• Consistent volumetric filling of various types of fluid
• Easy adjustment of filling volume
• Accommodates 6 oz and 12 oz cartridges
• +/- 2% (by weight) repeat fill accuracy
• Positive cut-off
• Cartridge Presence sensor
• Push button or foot-pedal operation
Specifications
Dimension 325 X 220 X 680mm (6 oz)
AC Input 110 / 220 VAC
Fuse 1A
Pneumatic Air Input Max 9.9 Bars
Repeat Fill Accuracy +/-2% (by weight)
Cartridge Sizes 6 oz & 12 oz
16
www.techno-digm.com
Technodigm Catalogue.indd 16 7/3/12 10:09 AM

19. Tanks & Pumps
Pressure Tanks
Pressure tanks provide an easy way to continuously supply dispensing materials (oils,
epoxies, silicone, etc) to your dispensing systems without the need to frequently replace
barrels and cartridges. With a wide volume range and numerous accessories, it is easily
customized to suit numerous applications.
PFT Tank
Dia Height (H)
Part Number Description
(ø)mm mm
Pressure Tank, 3L, Bottom/ Top Ported,
PFT-03BPR/TPR 165.2 310
Clamp Type
Pressure Tank, 5L, Bottom/ Top Ported,
PFT-05BPR/TPR 165.2 446
Clamp Type
Pressure Tank, 8L, Bottom/ Top Ported,
PFT-08BPR/TPR 216.3 403
Clamp Type
Pressure Tank, 10L, Bottom/ Top Ported,
PFT-10BPR/TPR 216.3 481
Clamp Type
Pressure Tank, 20L, Bottom/ Top Ported,
PFT-20BPR/TPR 267.4 619
Clamp Type
PFT Tank Pressure Tank, 40L, Bottom/ Top Ported,
PFT-40BPR/TPR 318.5 692
Clamp Type
POT TANK, ROUND BOTTOM
Dia Height (H)
Part Number Description
(ø)mm mm
Pressure Tank, 1L, Bottom/ Top Ported,
POT-01BPR/TPR 101.6 265
Clamp Type
Pressure Tank, 3L, Bottom/ Top Ported,
POT-03BPR/TPR 165.2 284
Clamp Type
Pressure Tank, 5L, Bottom/ Top Ported,
POT-05BPR/TPR 165.2 415
Clamp Type
Pressure Tank, 8L, Bottom/ Top Ported,
POT-08BPR/TPR 216.3 387
Clamp Type
Pressure Tank, 10L, Bottom/ Top Ported,
POT-10BPR/TPR 216.3 453
Clamp Type
POT Tank, Round Bottom Pressure Tank, 20L, Bottom/ Top Ported,
POT-20BPR/TPR 267.4 574
Clamp Type
POT TANK, FLAT BOTTOM
Dia Height (H)
Part Number Description
(ø)mm mm
POT-01TPF Pressure Tank, 1L, Top Ported, Clamp Type 101.6 218
POT-03TPF Pressure Tank, 3L, Top Ported, Clamp Type 165.2 233
POT-05TPF Pressure Tank, 5L, Top Ported, Clamp Type 165.2 374
POT-08TPF Pressure Tank, 8L, Top Ported, Clamp Type 216.3 347
POT Tank, Flat Bottom POT-10TPF Pressure Tank, 10L, Top Ported, Clamp Type 216.3 435
www.techno-digm.com 17
Technodigm Catalogue.indd 17 7/3/12 10:09 AM

20. PMT TANK
Dia Height
Part Number Description
(ø) mm (H) mm
PMT-10TP Pressure Tank, 10 L, Top Ported, Hinge Clamp Type 216.3 398
PMT-20TP Pressure Tank, 20 L, Top Ported, Hinge Clamp Type 293 423
PMT-40TP Pressure Tank, 40 L, Top Ported, Hinge Clamp Type 366 494
PMT Tank
Tank Options
Part Number Description
TO-TP Top Port
TO-LG Level Gage
TO-LS Level Sensor
TO-A Agitating
TO-H Heating
TO-W Window
TO-LC Load Cell
All tanks are manufactured with SUS304 material, with working pressure maximum at 5kg/cm². The outlet thread is NPT
1/4” or 1/8”, sealing material is NBR, silicone, EPDM, teflon coating (optional)
Pressure Pumps
Pressure Pumps are designed to allow high viscosity material to be dispensed straight from
the can or catridge. Since material is pumped straight from the material container, material
wastage is reduced to a minimum.
Pressure pumps can also be configured to be used as a loading station to transfer materials
from large cans to barrels for easy dispensing.
PP105, PP305 PP505 PP600 PP315CT PP315CT-2
Power AC 220V 50/60Hz AC 220V 50/60Hz AC 220V 50/60Hz AC 220V 50/60Hz AC 220V 50/60Hz
Electrical consumption 20W 20W 20W 20W 20W
Air Pressure More than 2Kgf/cm2 More than 2Kgf/cm2 More than 2Kgf/cm2 More than 2Kgf/cm2 More than 2Kgf/cm2
Air Consumption 80L/min 80L/min 80L/min 80L/min 80L/min
Min. Dispensing Volume 0.01cc/shot 0.01cc/shot 0.01cc/shot 0.01cc/shot 0.01cc/shot
More Than
Applying Viscosity 10,000 ~ 600,000cps 10,000 ~ 600,000cps 10,000 ~ 600,000cps 10,000 ~ 600,000cps
600,000cps
Cartridge Type Cartridge Type
Applying Container 1Kg, 3Kg, 5Kg 20Kg (5gallon) 20Kg (5gallon)
300cc ~340cc 300cc ~340cc
Weight 8.5Kg 24Kg 40Kg 15Kg 18Kg
1) Low sensor 1) Low sensor
Option Low Sensor
2) System 2) System
1) Can – 110mm/170mm 1) Can – 280mm 1) Can – 280mm
Can Size
2) Can – 140mm/200mm 2) Can – 360mm 2) Can – 360mm
18
www.techno-digm.com
Technodigm Catalogue.indd 18 7/3/12 10:09 AM

21. Dispensing Accessories
Barrels & Accessories
TechnoDigm offers a veriety of disposable syringe barrels with luer lock tip adapter, accepting standard dispensing
needles & tips. Industrial grade. Black barrels for UV curing and light sensitive materials. Translucent amber shaded
barrels for minimal UV light transmission.
Barrels (Clear) P-Type Barrels
Part number Size Part number Part number
BCLR3 3CC PB20 Barrel
BCLR5 5CC PP20 Piston
BCLR10 10CC PPC20 Conductive Piston
BCLR30 30CC PEC20 End Cap
BCLR55 55CC PTCO20 Orange Tip Cap
PECW20 White End Cap
Barrels (Amber)
Part number Size Hand Syringe with Plunger
BDA3 3CC Part number Size
HS1 1CC
BDA5 5CC
HS3 3CC
BDA10 10CC
HS5 5CC
BDA30 30CC HS10 10CC
BDA55 55CC HS30 30CC
HS50 55CC
Barrels (Black)
Part number Size Barrel Adapter Assembly
BBB3 3CC Part number Size
BBB5 5CC BAA3 3CC
BBB10 10CC BAA5 5CC
BBB30 30CC BAA10 10CC
BAA30/55 30/55CC
BBB55 55CC
Barrels (Blue) Pistons
Part number Size Part number Size
BBL3 3CC PPE3 3CC
BBL5 5CC PPE5 5CC
PPE10 10CC
BBL10 10CC
PPE30/55 30/55CC
BBL30 30CC
BBL55 55CC
End Cap
Part number Size
I-Type Barrels
Part number Part Name EC3 3CC
EC5 5CC
IB30 Barrel
EC10 10CC
IP30 Piston EC30/55 30/55CC
IPC30 Conductive Piston
IEC30 End Cap
Tip Caps
ITCO30 Orange Tip Cap
Part number Size
IECW30 White End Cap
TCO TIP CAP (ORANGE)
TCB TIP CAP (BLACK)
F-type Barrels
Part number Part Name
FB30 Barrel
FP30 Piston
FPC30 Conductive Piston
FEC30 End Cap
FECW30 White End Cap
www.techno-digm.com 19
Technodigm Catalogue.indd 19 7/3/12 10:09 AM

22. Tips & Needles
TechnoDigm offers a comprehensive range of needles and tips for precision dispensing of fluids, liquids, adhesives,
sealants, greases, etc. Blunt end stainless steel dispensing needle tips are the most popular and versions can be found
in different gauges, lengths and threads. They can be supplied with both 45° and 90° bends to help access difficult
areas. Tapered needles are used for high viscosity fluids; they are also described as “smooth flow”. Precision tips are
machined completely from stainless steel.
Blunt-end tips – 0.25” to 1.5” long
Gauge Part Number
ID OD Color
Size 0.25’’ 0.5’’ 1.0’’ 1.5’’
14G TBE14G025 TBE14G050 TBE14G100 TBE14G150 1.55mm 1.82mm Olive
15G TBE15G025 TBE15G050 TBE15G100 TBE15G150 1.37mm 1.82mm Brown
16G TBE16G025 TBE16G050 1.20mm 1.65mm Grey
17G TBE17G025 TBE17G050 1.04mm 1.50mm White
18G TBE18G025 TBE18G050 TBE18G100 TBE18G150 0.84mm 1.27mm Green
19G TBE19G025 TBE19G050 0.70mm 1.05mm Black
20G TBE20G025 TBE20G050 TBE20G100 TBE20G150 0.60mm 0.91mm Pink
21G TBE21G025 TBE21G050 TBE21G100 TBE21G150 0.51mm 0.82mm Purple
22G TBE22G025 TBE22G050 TBE22G100 TBE22G150 0.41mm 0.71mm Blue
23G TBE23G025 TBE23G050 TBE23G100 TBE23G150 0.33mm 0.64mm Orange
24G TBE24G025 TBE24G050 0.30mm 0.56mm Peach
25G TBE25G025 TBE25G050 TBE25G100 TBE25G150 0.25mm 0.51mm Red
27G TBE27G025 TBE27G050 TBE27G100 TBE27G150 0.20mm 0.41mm Clear
28G TBE28G050 TBE28G050 0.19mm 0.39mm Light Blue
30G TBE30G025 TBE30G050 TBE30G100 TBE30G150 0.16mm 0.31mm Lavender
32G TBE32G025 TBE32G050 0.10mm 0.25mm Yellow
Stainless Steel Tips – 0.5’’ long Blunt-end bent tips (45°/90°) 0.5’’ Flexible Tips
Gauge Size Part Number Gauge Size 45° 90° Gauge Size Part no.
14G TSS14G050 14G TAD14G4505 TAD 14G9005 14G TPTLL14G050
15G TSS15G050 15G TAD 15G4505 TAD 15G9005 15G TPTLL16G050
16G TSS16G050 18G TAD 18G4505 TAD 18G9005 18G TPTLL18G050
18G TSS18G050 20G TAD 20G4505 TAD 20G9005 20G TPTLL20G050
20G TSS20G050
21G TAD 21G4505 TAD 21G9005 22G TPTLL22G050
21G TSS21G050
22G TAD 22G4505 TAD 22G9005 25G TPTLL25G050
22G TSS22G050
23G TAD 23G4505 TAD 23G9005
23G TSS23G050
25G TAD 25G4505 TAD 25G9005
25G TSS25G050 Tapered Tips
27G TAD 27G4505 TAD 27G9005
27G TSS27G050 Gauge Size Part no.
30G TAD 30G4505 TAD 30G9005
30G TSS30G050 14G TPT14G
15G TPT15G
18G TPT18G
20G TPT20G
22G TPT22G
25G TPT25G
Cartridges & Accessories
TechnoDigm offers two different sizes of disposable reservoir cartridges. These dispensing cartridges are suitable for a
number of low-to-high viscosity materials including adhesives, dental resins, pastes, lubricants, gels, and silicones.
Cartridge
Part number Part name
6oz 12oz
CR06 CR12 Cartridge Retainer
CRC06 CRC12 Cartridge Reservoirs (Clear)
CRO06 CRO12 Cartridge Reservoirs (Opaque)
CPR (Red/White) Cartridge Plunger
CTCR (Red/White) Cartridge Tip Cap
CECR (Red) Cartridge End Cap
CTA Cartridge Tip Adapter (LL)
20
www.techno-digm.com
Technodigm Catalogue.indd 20 7/3/12 10:09 AM

23. UV Curing Systems
UV Spot Curing UVSPOT
UVSPOT is designed for operations that require flexibility, high performance/very high intensity and reliability. Its optics/
UV was engineered for maximum efficiency in the delivery of UV energy through a light guide. Its design also ensures
that not much heat will be transmitted. UV Spot has a lamp life expectancy of 2000hrs and a maximum intensity of
13,000mW/cm². Maintenance free and with slow degradation, it will have low lamp replacement rate. This results in
good productivity and reliability in the production process.
Features
• Long Lamp Life of 2000hrs
The system is designed with an optimized cooling system and an efficient optics design. This enables the lamp
to be cooled and maintain at a proper temperature for best performance. Degradation of the lamp is slow and
gradual and even at 2000hrs significant intensity can still be obtained from the lamp.
• Cool Light Output
UV Spot has a specially designed IR filter that helps to cut off high percentage of IR from transmitting through the
light guide.
• Timer Controlled Shutter
UV Spot has a programmable shutter for user to vary or set a certain intensity value. This setting can be easily done
through the LCD interface. Values from 1 to 100% can be set.
• Quick-change Lamp
The unique feature of the system is in its quick changing of lamp. The lamp can be easily accessed by removing a
side panel just by loosening a single thumbscrew.
Specifications
Lamp Rating 100W
Power Supply 220VAC (110 VAC optional), 5A (max), solid state
Lamp Life Up to 2000 hours
Shutter Programmable
Intensity >13,000mW/cm2 (as measured directly on a UV meter)
Lamp Spectral Range 250-600 nm
Light Delivery High Efficiency Liquid Light Guide, Dual, Triple & Quad- Pole
Light Guides with various lengths available
Dimension (in cm) 27 (L) X 30 (H) X 13 (W)
Weight 6.8 kg
www.techno-digm.com 21
Technodigm Catalogue.indd 21 7/3/12 10:09 AM

24. UV Point UVP
UV Spot Curing system is a high performance compact light curing system. Maintenance free, it incorporates an
ozone-free long life lamp and a highly efficient reflector for maximum output. The system is designed for convenience
of use with any curing process as it is highly portable it is also suitable for use with conveyors.
Features
• Long Lamp Life
The lamp housing is designed to optimize airflow so that there is proper and adequate cooling of the lamp. This will
prevent hot spots and arc sputtering thus helping to maintain good life span for the lamp. The lamp is also designed
with does not degrade sharply over time.
• Cool Light Output
UV Point comes with a diachronic coated mirror, which reflects only the usable UV wavelengths of light through the
light guide. IR, which is the main cause of heat, is thus minimized. This ensures that curing will be as cool as possible.
Combined with an optional inline filter, heat transmitted to the substrate/material can be cut even further. This
compares favorably to units in this class, which only uses inline filter thus resulting in high IR being transmitted.
• Timer Controlled Shutter
UV Point has a simple and easy to use timer for the control of the shutter. The timer can be switched from auto to
manual for operator control of curing duration this is situated on the front panel for easy access.
• Quick-change Lamp
The unique feature of the system is in its quick changing of lamp. The lamp can be
easily accessed by removing a side panel just by loosening a single thumbscrew.
Specifications
Lamp 100W Short Arc Mercury Lamp
Power 90-265 VAC Solid State Switching Power Supply
Lamp Life Up to 1000 hours
Shutter Long Life Shutter with Return Spring
Intensity 10W/cm2 (dependant on distance from substrate)
Lamp Spectral Range 250-600 nm
Light Delivery High Efficiency Liquid Light Guide, Dual,Triple & Quad-Pole
Light Guides with various lengths available
Dimensions (cm) 27 (L) X 30 (H) X 13 (W)
Weight 6.8 kg
UV Conveyor UVC2000
UVC2000 is a high intensity RF powered system which uses electrodeless lamp that is highly reliable and cost effective
to use. These electrodeless lamps have high efficiency and good performance with a long working life thus providing
more stability to curing of UV adhesive and epoxies.
The lamp module incorporates a highly elliptical reflective reflector that combines well with the lamp to provide a high
peak of UV irradiance. This high peak irradiance provides more efficient and faster curing with relatively low infrared
emission. Start up time is short (less than a minute). A standby mode is provided for even faster start up.
As a system, UVC2000 is easy to use and incorporate into production lines without much effort.
Features
• High intensity, Fast curing
• Long lamp life
• Low Maintenance
• 4000W System is also available
• Available in table top or floor standing version
Specifications
Lamp 2000W (max.)
Lamp type 6” Electrodeless
Power 220VAC, 50/60Hz, 20Amps, Single Phase
Intensity 600mW/cm² UVA
Curing Width 156mm
Belt Width 240mm
Dimension (cm) 165 (L) X 140 (H) X 56 (W)
22
www.techno-digm.com
Technodigm Catalogue.indd 22 7/3/12 10:09 AM

25. UV Bench Top Conveyor UV6
UV6 is a bench top or stand mounted light curing system, designed for laboratory or high volume production
applications. The conveyor features a quiet variable speed motor, with a velocity regulating drive that keeps the belt
speed constant for varying loads. The system can be configured with single or dual high intensity lamp heads UVMR400,
UVR600 or UVR800, which can be easily removed and reconfigured as stand mounted systems for increased versatility.
Features
• Adjustable Lamp Height
Lamp height can be adjusted from 1.5 to 5 inches
• Full UV Shielding
The conveyor light chamber is totally enclosed, shielding
the operator and passersby from any UV radiation. The light
chamber entrance and exit are protected by sliding doors with
extended hoods.
• Adjustable End Chute
The system has an adjustable position and chute for
accumulating cured parts as they exit the conveyor.
• Exhaust Port
The light chamber has a top-mounted 3” diameter port, for
optional venting to facility exhaust systems.
UVR 800 UVR 400 / 600 UVMR 400
Lamp
Single Dual Single Dual Single Dual
Input Power 220VAC, 50 / 60Hz
Belt Width 9”
Belt Speed 0.7 - 19.6fpm (20 - 600km / min)
Curing Width 6” 6” 4”
40” (100cm) L 51” (300cm) L 40” (100cm) L 51” (300cm) L 32” (80cm) L 40” (100cm) L
Dimension
26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W
(Include blower)
22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H
UV Ray UVR400/600
UVR400/600 is a compact UV curing system which integrates all components into one lamp head. UVR400/600 is
designed as a table top as well as conveyor system. It can be easily mounted on any conveyor system without cabling
or remote control boxes.
Features
• High intensity, fast curing
• Two level intensity selection (100 and 50%)
• Lamp Hour Counter
Specifications
Lamp 400/600W Metal Halide Lamp
Power 220 VAC, 50/60Hz
Intensity 200mW/cm2 UVA light (320-390 nm)
Cure Area 14 X 17 cm
Dimensions 255 X 270 X 160 mm
www.techno-digm.com 23
Technodigm Catalogue.indd 23 7/3/12 10:09 AM

26. UV Ray UVR800
UVR800 UV curing system is ideal for use in the electronic, medical and general industry. It is designed for conveyor
system with a lamp rating of 800 watts that will provide a relatively fast curing rate. The system is also easy to use and
install.
Features
• High intensity, fast curing
• Two level intensity selection (100 and 50%)
• Lamp Hour Counter
Specifications
Lamp Rating 800W Metal Halide Lamp
Power 220 VAC, 50/60Hz
Intensity >250mW/cm² UVA light (320-390 nm)
Cure Area 15 X 18 cm
Dimensions: Control Box 248 X 298 X 100 mm
Lamp Housing 254 X 260 X 160 mm
UV Mini Ray UVMR400
The UV Mini Ray 400 is a portable or low production UV curing system. Because of its versatility, it can handle a
variety of UV curing applications. The unit features a removable head, which serves as a handheld curing lamp during
operation. Due to its simple yet high-tech design, the Mini Ray is extremely user-friendly and reliable, requiring virtually
no learning curve or setup time.
Features
• High intensity, fast curing
• Two level intensity selection (100 and 50%)
• Lamp Hour Counter
Specifications
Lamp 400W Metal Halide Lamp
Power 220 VAC, 50/60Hz
Intensity 500mW/cm² UVA light (320-390 nm)
Cure Area 8 X 13 cm
Dimensions (mm) 203 X 127 X 149 mm (Lamp Housing Only)
UV Flood UVF400/600
UV Flood Curing System is a high performance, high intensity compact light curing
system. Maintenance free, it incorporates an ozone-free long life lamp and a highly
efficient reflector for maximum output. The system is designed for convenience of use
with any curing process as it is highly portable. It is also suitable for use with conveyors.
Features Specifications
• High Output Intensity Lamp 400/600W Metal Halide Lamp
• Microprocessor Control Power 90-265 VAC, Auto Ranging
• Lamp Intensity Setting Lamp Life Up to 1000 hours
• Exposure Time Setting Shutter Integrated Flexible
• Safety Lamp Spectral Range 250 to 650 nm
• LCD Display Cure Area 20 X 15 cm
Dimensions (in cm) 28 (L) X 25 (H) X 22 (W)
Weight 6.8 kg
24
www.techno-digm.com
Technodigm Catalogue.indd 24 7/3/12 10:09 AM

27. Untitled-1 5 8/27/12 10:31 PM
7/6/12 3:53 AM

28. TechnoDigm Innovation Pte Ltd
31 Bukit Batok Crescent
#01-39 The Splendour
Singapore 658070
Tel: (65) 6493 3826
Fax: (65) 6493 3829
www.techno-digm.com
Email: info@techno-digm.com
Untitled-1 2 Catalogue cvr.indd 1
Technodigm 8/27/12 3:53 PM