3. Volgende
3
Vorige
WHAT IS TANKTECH BV?
- Tanktech was established two years ago
- staff excists out of mechanical engineers and former marine officers
- TankTech is an accredited inspection body based on
ISO 17020/17025 type A.
- since the establishment in 2009 more then 100 tankervessels were
inspected with a corresponding total number of approx. 1000 tanks.
“Just to be sure”
4. Volgende
4
Vorige
WHY CALIBRATION?
- Tanktech is a type-A inspectionbody. This means that Tanktech has
proven to act without any conflict of interests.
- by ensuring that the certificate prepared by an independent
institution, the certificate is a public trust in international trade
- all the calculations are based on real measurements on the spot.
Deformations and deviatons from the drawings are taken into consideration
- critical measurements are done with equipment of which the
International traceabilty is guaranteed
“Just to be sure”
5. Volgende
5
Vorige
SAFETY
Tanktech is doing the utmost to let their staff act in a safe environment to
minimize the possibility of accidents. Therefore our staff is equipped with:
“Just to be sure”
Fixed helmet light, so both hands are
free for use
Safety helmet
Respitory masks for use in gaseous
atmospheres
Sonim XP-3 Sentinel loneworker
device, equiped with non-movement,
fall down and tilt sensors. The
devices offer a handsfree
communication
Working Shoes S3-class
Oxygen measurement decives
Full body fall protection harnesses
Mutligas meter for continiously
monitoring of the atmosphere
Fall arresting winch with an integral
rescue function
6. Volgende
6
Vorige
WORKING PROCEDURE
- during intake of order all necessary data is recorded after which an
offer will be prepared
- after receipt of the order all preparations are made to execute
- before taking of it will be assured that conditions during
measurements are according our requirements in terms of safety
and accessibility
- EODR (Electro-Optical Distance Ranging) 3D-laser devices are used,
the volumes of all internals are recorded
- volumes are calculated with the aid of 3D-software
- the calibrationcertificates is produced and sent to the client.
“Just to be sure”
7. Volgende
7
Vorige
CALIBRATION CERTIFICATE
- the certificate complies with the requirements as per the OIML R 95
- the certificate includes:
- general information regarding the objects;
- list and locations of measurement devices;
- maincapacitytables;
- correctiontables for thermal expansion/contraction;
- correctiontables for list- and trim;
- samplecalculations;
- schematic drawings of pipelines.
“Just to be sure”
8. Volgende
8
Vorige
COVERAGE AND DELIVERYTIMES
- Tanktech conducts it’s services worldwide
- Tanktech has agents in several ‘shipbuilding’ countries
- upon request ‘QRS’ can be carried out. QRS means Quick
Response Services and is developed for those cases in which a very
short deliverytime is necessary. See our website for terms
“Just to be sure”
9. Volgende
9
Vorige
SUMMARY
- Tanktech operates worldwide. Due to the ‘QRS’-system, short
response times can be achieved
- Tanktech’s certificates are accepted by all major oilcompanies
because of the fact that Tanktech is accredited
- staff excists out mechanical engineers and former marine officers
- after inspection by Tanktech your tanks are turned into calibrated
measurement devices with worldwide acceptance
- visit our website www.tanktech.eu for additional information.
“Just to be sure”
10. Volgende
9
Vorige
SUMMARY
- Tanktech operates worldwide. Due to the ‘QRS’-system, short
response times can be achieved
- Tanktech’s certificates are accepted by all major oilcompanies
because of the fact that Tanktech is accredited
- staff excists out mechanical engineers and former marine officers
- after inspection by Tanktech your tanks are turned into calibrated
measurement devices with worldwide acceptance
- visit our website www.tanktech.eu for additional information.
“Just to be sure”