1. My Rig that I need
Custom True bypass
looper, patch bays,
and a latching
footswitch module for
By
Greg Davis

2. Simple explanation of my Rig
I’m essentially just finding a way to run 2 stereo signals
simultaneously. Stereo signal A and Stereo Signal B. I’m doing this
because:
• I’m using a weird 4x12. I’m putting 2 1x12 cabs on the ground and
stacking a 2x12 cab wired in stereo on top of them.
• Stereo Signal A goes to the 1x12’s, Stereo Signal B goes to the 2x12
• I set it up this way so I can use my RC-50 Loop Station in full stereo
(Mix A), and also be able to play over my full stereo loops on a
completely separate stereo mix (Mix B).

3. Complicated signal chain explanation
of my rig (this will make sense later)

5. Guitar---True Bypass Looper mono fx---Patch Bay A ---Patch Bay B---Preamp ---Rack FX---Preamp—Patch Bay B---Patch Bay A---True Bypass
Looper stereo fx& AB/Y outputs---Patch Bay A: From here it goes to Power Amps A and B, and then Speakers as shown on the next slide.

6. Here is a look at the Rack, Rack Patch Bay (Patch Bay B), and how I have my speakers set up.

7. Here is a look at my Pedal Board, Remote Module, and Pedal Board Patch Bay (Patch Bay A)

8. Here’s my contact info and links to manuals of some of the equipment I’m
using so you can see the input/output configurations if need be.
Greg Davis Mr.gregdavis@yahoo.com (541-
285-1184)
• Boss RC-50 Loop Station http://www.bossus.com/backstage/product_manuals/?group=2
• Mesa Boogie Studio Preamp
http://www.mesaboogie.com/manuals/StudioPre.pdf
• Rockman Stereo Chorus/Delay http://www.tom-scholz.com/Manuals/CD.pdf
• Rockman Stereo Echo http://www.tom-scholz.com/Manuals/SE.pdf
• Mesa Boogie 20/20 Stereo Power Amp
http://www.mesaboogie.com/manuals/20-20%20Manual.pdf

9. Thank you!!