3. / AREA /
Made of ecological panels free of any toxic substances and complying with all norms protecting
the environment. Compliant to European formaldehyde emission standards.
DOORS AND DRAWER FRONT PANELS /
“White melamine” doors are 18mm particle board covered with melamine sheet. “Wooden” front
panel version Area is 19mm particle board, whereas “lacquered” front panels have an MDF panel
of 18mm thickness, painted with polyester primer, polyurethane paint, glossy or matt finish.
4 5
5. / DORIS /
GLASS DOORS /
Frame as in solid doors; 4 mm thick tempered satin-finish glass.
DRAWER FRONT PANELS /
As for solid doors.
DOORS AND DEEP DRAWER FRONT PANELS /
Light MDF panel with matt melamine coating on the rear to match the front; front and edges coated with coloured polymer film in
gloss or matt effect (ivory opt. only) or grey oak, tobacco oak, walnut or cherry effect for polymer Doris. “Glass Doris” frame consists of
extruded aluminum profile which has undergone brushed chemical oxidation, with gloss champagne finish and 4 mm thick extra-light
8 tempered glass panel, painted in a range of water-based shades, glued to the outside of the product. 9
7. / FABIANA /
DOORS AND DEEP DRAWER FRONT PANELS /
For “Polymer Fabiana”, MDF panel with matt
melamine coating; grooved front with horizontal
stripes, coated with gloss polymer film in a range of
colours or matt effect cherry, bleached oak, ash oak,
teak, canaletto walnut, ash oak or aluminum. Glass
door frame as in solid doors; 4 mm thick tempered
satin-finish glass. For “Matt lacquered Fabiana”, MDF
panels lacquered using the powder painting technique,
with a semi-matt finish; available in a range of colours;
“Gloss acrylic Fabiana” doors consists of a 16 mm thick
wood particle board panel support externally and the
two lateral sides coated with thick layer of gloss
coloured or metallic effect. Glass Fabiana frame
consists of extruded aluminum profile which has
undergone brushed chemical oxidation, with “brill”
finish and extra-light gloss tempered glass panel,
painted on its inner side in a range of water-based
shades, glued to the outside of the product.
DRAWER FRONT PANELS /
As for solid doors.
12 13
8. / FOSCA /
DOORS AND DEEP DRAWER FRONT PANELS /
Frame in solid lime wood veneered with slices of cherry wood or bleached oak and chipboard central
panel veneered with slices of cherry wood or bleached oak on both sides; solvent stain and closed pore
polyurethane base, with semi-matt degree of brightness for cherry wood and bleached oak finish; solvent stain and open pore base
with matt degree of brightness for decapé grey oak and
lacquered white oak. “Glass Fosca” frame consists of
extruded aluminum profile which has undergone brushed
chemical oxidation, with matt champagne finish and 4 mm
14 thick extra-light tempered glass panel, painted in a range of 15
water-based shades, glued to the outside of the product;
the handle is a fixed aluminum profile and is incorporated
onto the frame.
9. / GAIA / LISCIA
DOORS AND DEEP DRAWER FRONT PANELS /
“Smooth Matt”, MDF panels lacquered, semi-matt finish; available in a range of colours. “Smooth gloss”, door is 16mm wood particle
board panel support coated with gloss coloured or metallic effect, and internally in an embossed finish.
GLASS DOORS / Aluminum frame consists of an extruded aluminum profile ,brushed chemical oxidation, with champagne finish; fin-
16 ished with satin-finish or extra-light gloss tempered glass panel, painted on inner side in a range of water-based shades. 17
10. / GAIA / TELAIO
DOORS AND DEEP DRAWER FRONT PANELS /
“Natural cherry” wood, frame in solid common alder, veneered with slices of European cherry, lacquered. “Honeyed cherry” wood,
frame in solid lime wood, veneered with slices of European cherry and tanganyika. “Grey-stained and red-stained bleached oak” wood,
frame in hornbeam, veneered with slices of striped European oak, lacquered; white-tinged stain for bleached oak, dark for grey and red
stains. “Birch” wood, frame in solid birch veneered with slices of turned birch, veneered on with slices of striped European cherry wood
in slats, and tanganyika walnut; lacquered. “White lacquered” finish, frame in solid ash, veneered with slices of ash; solvent lacquering.
All chipboard central panel. “Solista walnut” wood, frame and central panel in MDF coated in walnut effect decorative foil.
GLASS DOORS / Frame as in solid doors; 4 mm thick tempered glass, pavé printed or smooth lacquered in cream.
18 DRAWER FRONT PANELS / in solid birch, ext./int. veneered as for solid doors. 19
11. / GEORGIA /
DOORS AND DEEP DRAWER FRONT PANELS /
“Veneered Georgia”, 24mm door in solid “Yellow pine” (frame) with solid yellow pine central panel; lacquered and brushed with water-based
products. GLASS DOORS: Frame as in solid doors; 4 mm thick transparent silver serigraphed tempered glass. “Gloss Lacquered”, 24mm thick
faced MDF panels lacquered with a white polyester resin base and finished with gloss polyurethane lacquer available in various colours. GLASS
DOORS: Frame as in solid doors; 4 mm thick transparent satin-finish tempered glass. “Matt Lacquered Georgia”, 24mm faced MDF panels,
lacquered with a white polyester resin base and finished with matt polyurethane lacquer; available in various colours. GLASS DOORS: frame
as in solid doors; 4 mm thick transparent satin-finish tempered glass. “Glass Georgia”, frame consists of extruded aluminum profile which has
undergone brushed chemical oxidation, with “Brill” finish, or which has a 4 mm thick extra-light tempered glass panel, painted on its inner side
in a range of water-based shades, glued to the outside of the product
20 DRAWER FRONT PANELS / As for solid doors. 21
12. / JAZZ /
DOOR SURFACES /
20mm wood particle board matt
open-pore melamine finish or extra
glossy, curtain-coated lacquered finish
available in 8 colors. Two wooden finished
available: Wengè-stained oak or open-
pore Hapsburg walnut melamine.
GLASS DOORS /
21mm aluminum frame with “brill” finish,
grey screen printed glass.
22 23
13. / LEDA /
DOORS AND DEEP DRAWER FRONT PANELS / Light MDF panel with matt melamine coating on the rear to match the front;
front and edges coated with coloured or solista walnut effect polymer film.
GLASS DOORS / Frame as in solid doors; 4 mm thick pavé printed tempered glass. Aluminum glass frame doors frame consists of
extruded aluminum profile which has undergone brushed chemical oxidation, with champagne finish and 4 mm thick extra-light gloss
tempered glass panel, painted on its inner side in a range of water-based shades, fitted to the product.
24 DRAWER FRONT PANELS / As for solid doors. 25
14. / LUCY /
DOORS AND DEEP DRAWER FRONT PANELS /
Frame consists of extruded aluminum profile which has
undergone brushed chemical oxidation, with gloss champagne
finish and 4 mm thick extra-light gloss tempered glass panel
with horizontal grooves, painted on its inner side in a range
of water-based shades, fitted to the product.
26 27
15. / MARTINA /
DOORS AND DEEP DRAWER FRONT PANELS:
“Gloss acrylic Martina” door consists of a 16 mm thick wood particle board panel support ex-
ternally and the two lateral sides coated with a 1.4 mm thick layer of gloss coloured or metallic
effect and internally coated with 1.2 mm thick methacrylate (polystyrene) in an embossed finish;
everything is edged on upper and lower sides with matching gloss ABS.
“Glass Martina” frame consists of extruded aluminum profile which has undergone brushed
chemical oxidation, with gloss champagne finish and 4 mm thick extra-light gloss tempered
glass panel, painted on its inner side in a range of water-based shades, fitted to the product.
“Polymer Martina“is MDF panel with matt melamine coating on the rear to match the front;
front coated with matt cherry, solista walnut or grey oak effect polymer film.
GLASS DOOR / Frame is extruded aluminum profile which has undergone brushed chemical
oxidation, with matt champagne finish; fitted with 4 mm thick light tempered satin-finish glass.
28 DRAWER FRONT PANELS / As for solid doors. 29
17. / MILLENIUM /
Made of ecological panels free of any toxic sub-
stances and complying with all norms protecting
the environment. All compliant to European
formaldehyde emission standards.
DOORS AND DRAWER FRONT PANELS /
“Wooden” front panels have 25mm central panel
in phenolic solid wood birch, veneered oak, teak, olice
,zebrano, and walnut. Solve-borne painting with acryl
matt. “Framed wooden” doors have lateral profiles
in phenolic solid wood birch, veneered oak, teak, olive,
zebrano, and walnut. Solve-borne painting with
acryl matt.
GLASS DOORS / Front panels are lacquered frosted
and clear tempered glass with low profile aluminum
frame. Finish stainless steel.
32 33
19. / NILDE /
DOORS AND DRAWER FRONT PANELS /
“Lacquered Nilde”: 24mm MDF. Lacquered matt
finish in snow white, absolute white, ivory, yellow, blue,
red, mocha, amaranth red, graphite gray, orange cream,
blue bahama olive green, apple green, lilac, cyclamen,
mallow, viola, eggplant, rope gold old wisteria, absolute
black, gray, graphite metallic, metallic red, black metallic,
bronze metallic.
“Laminated Nilde”: Aluminum frame finishing brill
with plate sp.3 mm porcelain stoneware laminate finishes:
metropolis snow, metropolis smoke, metropolis moro,
metropolis black, oxide pearl. Drawers in oxide ivory,
oxide moro, oxide black.
“Polymeric Nilde”: 24mm MDF covered in polymeric
solid opaque finish with melamine in opaque stain in the
following colors: white, ivory; or 24 mm MDF covered in
polymeric wood effect matt finish brushed vertical flame
with melamine in opaque stain, colored; or 24mm MDF
covered in polymeric solid glossy finish with melamine
opaque stain, colored.
“GLASS NILDE”: Aluminum frame, “brill”, with external
glass casket produced by tecnovetro painted in bright
colors; or aluminum frame, “brill” with external glass
opaque and satin paint; or aluminum frame, “brill”, with
external glass casket produced by tecnovetro opaque with
flower painted on; or aluminum frame finishing mocha with
external glass casket produced by tecnovetro painted in
bright colors; or aluminum frame finishing mocha with
external glass opaque and satin painted; or aluminum
frame finishing mocha with external glass casket produced
by tecnovetro opaque with flower painted on.
All these versions come in many various color selections.
GLASS DOORS / standard - frame in 24mm MDF
glossy finish lacquered and brushed, satin glass. Custom -
Aluminum frame, 24mm finish “brill”, satin glass.
36 37
20. / NOEMI /
DOORS AND DEEP DRAWER FRONT PANELS /
“Matt Noemi”, door consists of a melamine faced wood particle board panel support, coloured or wood effect, rounded on the two sides and
edged on the top and bottom with 1 mm thick ABS in a matching shade; everything is glued on using thermosetting polyurethane adhesives.
The finish can be smooth or “smart” (slightly ridged wood grain effect), or with a raised decoration (opt. 366 mocha only). “Gloss Noemi”, door
consists of a plastic laminate faced wood particle board panel support in a solid colour, rounded on the two sides and edged on the top and
bottom with 1 mm thick ABS in a matching shade; everything is glued on using thermosetting polyurethane adhesives.
ACCESSORY DOOR / Light MDF panel with horizontal grooves, coated in aluminum coloured polymer with a champagne finish.
GLASS DOORS (ALUMINIUM FRAME) / frame is extruded aluminum profile which has undergone brushed chemical oxidation,
with matt champagne finish; fitted with 4 mm thick light tempered satin-finish glass.
DRAWER FRONT PANELS / As for solid doors.
38 39
21. / PAMELA /
DOORS AND DRAWER/DEEP DRAWER FRONT PANELS /
Frame consists of extruded aluminum profile which has undergone
brushed chemical oxidation, with “brill” finish and 4mm thick extra-light
gloss tempered glass panel, painted on its inner side in a range of water-
based shades, or an extra-light matt tempered glass panel featuring a
tone-on-tone lacquered and re-fired flower, also painted on its inner side
in a range of water-based shades, glued to the outside of the product; the
handle is a fixed aluminum profile and is incorporated onto the frame.
40 41
22. / SABINA /
DOORS AND DEEP DRAWER FRONT PANELS /
MDF panels lacquered using the powder painting
technique (thermosetting powders), with a semi-
gloss finish; available in a range of colours.
GLASS DOORS / Frame in yellow poplar with
base in matt non-yellowing polyurethane Teak stain;
4 mm thick tempered satin-finish glass.
DRAWER FRONT PANELS / As for solid doors.
42 43
24. / SONIA /
DOORS AND DEEP DRAWER FRONT PANELS /
frame consists of extruded aluminum profile which has under-
gone brushed chemical oxidation, with champagne finish, fitted
with a 4 mm thick matt or gloss layered laminate panel in various
colours or bleached oak/wenge imitation wood finishes.
46 DRAWER FRONT PANELS / As for solid doors. 47
25. / YARA /
DOOR SURFACES / MDF panel covered with anti-stain natural or dark broen leather, or glass in 12 different colours; MDF panel veneered in
wood of Palisander, walnut “Canaletto”, staving oak, ebony Malindi or oak Wengè; Aluminum frame with titanium finish, 21mm thickness.
48 GLASS DOORS / Aluminum frame with titanium finish, 21mm thickness; Gray glass or silk-screen printed 4mm glass. 49