1. NCTOR800 Lathe Accessories Lathe to realize columns and cylindrical pieces, mainly composed of a towing unit and adjustable tailstock. Size of workable pieces: 1.080 mm (ø) x 3.200 mm (length) (larger workable diameters upon request). If the lathe is purchased, the machine is supplied only with the worktable 3.500 mm long. Using the machine in the "bridge saw" mode, the useful travel of the "X" axis changes from 5.500 mm into 4.500 mm.

2. NCF1100SPACC Pair of lateral steel shoulders (replacing the concrete walls) on which the beam runways are to be fixed; the shoulders must be fixed on special concrete slabs that shall be provided and paid by the customer. N.B. Whatever necessary for the wastewater channelling and drainage shall be provided and paid by the customer as well. Accessories

3. NCF1400SPACC Pair of lateral steel shoulders Pair of lateral steel shoulders (replacing the concrete walls) on which the beam runways are to be fixed; the shoulders must be fixed on special concrete slabs that shall be provided and paid by the customer. N.B. Whatever necessary for the wastewater channelling and drainage shall be provided and paid by the customer as well Accessories

4. NCFMAG27A00 Mobile, carrousel-type 27-position tool-store Accessories Mobile, carrousel-type 27-position tool-store for HSK-B80 cones replacing the rack-type tool-store (for standard machine).

5. NCFMAG30A00 Mobile, carrousel-type 30-position tool-store Accessories Mobile, carrousel-type 30-position tool-store for HSK-B80 cones replacing the rack-type tool-store (for machine equipped with optional high-frequency spindle with HSK-A63 coupling).

6. EM3014A00 M3014 high-frequency spindle 14.500rpm Accessories

7. WP800PRAS Machine prearrangement for dust suction Accessories Machine prearrangement for dust suction through exhausters which are manually adjusted by the operator. N.B. The dust extracting plant and filters are not included in the supply.

8. WP800IAP Dust extraction plant Accessories Dust extraction plant with capacity of 5.200 m3/hour and suction pressure of 4.000 Pa. The plant is mainly composed of: 1 bag filter with reverse rinsing and drainage on a mobile cart through stellar valve. 1 electric exhauster of 11 kW, with sleeves and vibration-damping stoppers. 1 soundproofing cover for the fan. 1 fast cleaning unit composed of a highly efficient cyclone. 1 rotary valve with three-phase gearmotor, to be inserted under the cyclone cone, and a 5,5 kW centrifugal high-head electric exhauster. 1 pipe for connection with the centralized piping, provided with diverter valves. – suitably designed side suction orifices. – exclusion/inclusion slide valves. 1 pneumatic closing valve for stationary machine. 1 stirrup to anchor the cyclone to the wall. 1 deviation inside the machine for dedicated cleaning. 1 electric control board. N.B. The extracting plant accepts dry powders only; if pieces containing emulsions and liquids are to be machined, it is essential to cut off this plant. The price includes the plant installation and start-up at the customer's factory.

9. NCFSOFFK55 Set of top bellows Accessories Set of top bellows made from reinforced linenized material and supported by a suitable drive structure that retains chips and rough powders inside the working area. They consist of a first set of bellows ("Y" axis) moving along a structure which is an integral part of the bridge, and a second set of bellows ("X" axis) moving along a structure which is an integral part of the runways; they are fixed to one end of the bridge and to the machine guards. The set of "X" axis bellows on the operator' side is provided with a device for the automatic hooking / release to/from the front guards, and a handling system for its packing on the bridge. This device makes the working area approachable from above, therefore the machine loading/unloading operations can be performed using a bridge crane

10. NCFIMPV Vacuum plant and manifold Accessories

11. WPGLLPUA00 Laser sensor To control both the tool profile and the tool diameter and length, complete with software and installed on a corner of the work-table. N.B. The installation of this unit reduces the work area next to the laser by a triangle of 150x150 mm . Accessories

12. SETVMARS230 Set of suction cups (H=230mm) with mechanically-locked support , complete with brackets and composed of: n. 2 rectangular suction cups of 70x40 mm n. 4 circular suction cups ø 150 mm n. 6 rectangular suction cups of 300x75 mm n. 6 rectangular suction cups of 300x150 mm n. 36 brackets to lock the suction cups n. 1 kit of gaskets, connectors and small spare parts Accessories

13. NCCL Optical system for the reading and 3D scanning of the piece shape, composed of laser head and control software . Accessories

14. NC0709TFR Special head to execute pockets having a constant depth with respect to the slab polished face, so as to create the recess needed to fix stainless steel sinks at the same level of the top polished surface; it is prearranged to work using small diameter mills . Accessories

15. WPTARM Sensor with radio transmission used to measure the pieces under production transmitting by radio the position ("X", "Y" and "Z" co-ordinates) of the measured piece. Accessories

16. Accessories

17. BSCAMFIVEADVA00 Bretonsmartcam FIVE MODELLING BretonSmartCam FIVE" software for the CAD/CAM programming of shaping, sawing and turning centres with up to 6 axes, allowing to carry out the following major functions: - shaping, profiling, drilling, milling and dishing out with miller or shaped tools - polishing of tops (even inclined) - milling and polishing of grooves on tops (even inclined) - engraving of Windows "True Type" letters - bas-reliefs imported from digitized surfaces - cutting of slabs with saw blade - shaping, profiling, scabbling, trimming and dishing out of small blocks with saw blade If existing, the software manages a possible lathe, performing the following main functions: - machining of cylindrical or conical columns - machining of basements and capitals of cylindrical columns - execution of bas-reliefs on cylindrical columns, imported from flat or cylindrical digitized surfaces - execution of linear grooves on cylindrical or conical surfaces Accessories

18. BSCAMFIVEADVA00 Bretonsmartcam FIVE MODELLING The software operates in a Windows environment, is easy-to-understand and user-friendly thanks to the programming on 3 interpolated and 2 (3, in case there's a lathe) positioned axes. It is provided with parametric macros enabling to: execute drawings starting from standard parametric models in a simplified way It is also provided with a 2D CAD that allows to: - realize any bidimensional drawing with relevant dimensions - define the piece tridimensional volume of work - define any plane within the generated piece tridimensional volume of work - manage the bidimensional drawing realized on the selected working plane, however it is oriented in the space import drawings in .DXF and .DWG format from external CAD or template sensors - place the pieces to be realized directly on the slab to be machined, so as to utilize its surface at most - program automatically and display the arrangement of the suction cups on the worktable - interface with the software of a possible laser projector for arranging the suction cups on the worktable - interface with the software of a possible bas-relief digitizer The supply includes nr. 3 training days. Accessories

21. Accessories BWIRTWORKA00 BretonVirtualWork" software for the virtual simulation of the working cycles

23. BLATHEPLUSA00 BretonLathe PLUS" software for the CAD/CAM programming of turning centres with up to 6 axes Accessories