BIM For Free_28May2013_EdBartlett_BIM and lifecycle management
•
1 gostou•874 visualizações
Recomendados
Recomendados
Mais conteúdo relacionado
Mais procurados
Mais procurados (20)
Semelhante a BIM For Free_28May2013_EdBartlett_BIM and lifecycle management
Semelhante a BIM For Free_28May2013_EdBartlett_BIM and lifecycle management (20)
Mais de BIM Academy
Mais de BIM Academy (6)
Último
Último (20)
BIM For Free_28May2013_EdBartlett_BIM and lifecycle management
- 1. BIM and lifecycle management BIM Academy May 28th Edwin Bartlett - Kykloud
- 2. Why is Asset Management Relevant to BIM?
- 3. 6 dimensions But also… 12 edges 8 corners Many teams of people beyond design & construction FM & Asset Management - a tough one to crack?
- 4. 6 dimensions
- 5. What does Asset Management Require from BIM BIM FM Services Potential • Portfolio planning (buy, sell, rent etc.), rationalisation programmes/ management of surplus property, transaction services in Part • Condition surveys, life-cycle costing, capex/opex balance and investment planning, procurement, performance monitoring, space optimisation Potential • Energy procurement, bill validation, legislation consultancy, workforce education, energy audit and advice • Installation/ maintenance of BMS, equipment optimisation/ re-configuration, metering • M&E (including HVAC), building fabric maintenance, grounds maintenance ? • Catering, cleaning, security FMdeliveryEnergyservicesManagementservices Soft FM Hard FM Energy services delivery Energy management/ consultancy Asset / property management Property strategy FM focus on managing rising FM and energy costs, carbon pressures, legislation, capital constraints, cost efficiency targets NOT the technology BIM is lifecycle facility management supported by digital technology BIM is not only 3D visualization tools: central data storage area/portals for extracting relevant FM information “Make BIM useful to a wider community” http://www.wbdg.org/bim/nibs_bim.php property managers, appraisers, brokers, mortgage bankers, facility assessors, facility managers, maintenance and operations engineers, safety and security personnel as incident responders, landscape architects, infrastructure engineers and operators etc Real demand for BIM in FM but only if its collaborative
- 6. BIM into FM – proven early benefits • Intelligent lifecycle replacement planning – e.g. lifecycle capital replacement models and plans linked to design models (2D or 3D) • Reduced Energy & Carbon impacts – e.g. linking to real-time building submeter and sensor data on electricity and occupancy (Autodesk Project Dasher) • Affordable risk based preventive maintenance – e.g. linking maintenance to risks, criticality and quality of assets of specification • Delivering cost effective refurbishment – e.g. existing buildings surveyed using point cloud surveys, feed into condition surveys and new capital work cost planning • Efficient space management – e.g. people/HR data, utilisation and FF&E management • Integrated real time condition assessment – e.g. in-field condition surveys apps linking to asset database and lifecycle plans
- 7. FM to BIM: A workable model • Focused activities at each stage of design: 1. Option Appraisal i.e. specification choice 2. Service Cost Analysis i.e. cleaning or maintenance by asset 3. Whole Buildings Cost analysis i.e. annual budget 4. Handover and commissioning i.e. operational efficiency and adequacy of O&M • Data requirements: which systems/assets/elements and what data properties from model • Data flow: from who and where to • Data drop timings: 2-3 required • How will the data be updated operationally?
- 8. BB (before BIM) c.2000 Documents Lifecycle model O&M Manuals Spec £ BoQ Life cycles Spaces & Dimensions FM 2D Design Data input
- 9. Emerging Data Flows – design stage BIM to FM Documents Lifecycle Model O&M Manuals Spec£ Cost BoQ Life cycles Spaces & Dimensions Quants Spec FM Model 3D Design Model Data Web Services API data structure filter e.g. IFC / COBie / own Portfolio & Site data Economic data e.g. inflation
- 10. Emerging Data Flows – BIM in refurb Documents Spec Activity Life cycles Spaces & Dimensions Quants Asset Register (Spec) FM Model 3D Design Model Field Data Collection Survey via Web Services API data structure filter e.g. IFC / COBie / own Portfolio & Site data Dimensions Condition Photos data import e.g. IFC / COBie / own Refurb Design Model Field Data Collection via Point Cloud Survey + Point Cloud
- 13. Revit - elemental or asset attribute data
- 14. Example Component level WLC KyKloud
- 18. COBie – A few observations from an FM • COBie is a spreadsheet: “we use asset management databases” • Doesn’t handle “portfolio” or multiple facility level asset data • Service life data fields exist but don’t get used at design stage • Asset Classifications - FM operators have their own asset codes and don’t use Uniclass, typically driven by client contract models • Latest version contains the concept of “impacts” to cover cost and carbon – Cost impacts are rarely in the 3D model so a COBie export from a model will not populate this data – Costs have to come from elsewhere! • Macro economic and risk assumptions missing – just as critical as asset data • FM and lifecycle standards not yet full bedded in
- 19. FM will keep the data alive
- 20. Conclusion • BIM = lifecycle management supported by digital technology – 3D visualisation design tools support & improve the process • FM BIM alive and kicking – Business benefits are visible and achievable – Push and support the supply chain • Asset owners more interested in: – Data and not just the design model – Real usable outputs e.g. lifecycle investment plans – FM will keep the model alive
Notas do Editor
- 3-D block with texture and engraved text(Advanced)To reproduce the shape effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rectangle (first option from the left). On the slide, drag to draw a rectangle.Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 3”.In the Shape Width box, enter 3”.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and then select Picture or texture fill. Click the button next to Texture, and then click Oak(fifth row, third option from the left).Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line. Also in the Format Shape dialog box, click 3-D Rotation in the left pane, and then do the following:Click the button next to Presets, and then under Perspective click Perspective Left (first row, second option from the left).In the X box, enter 40°.In the Y box, enter 10°.In the Perspective box, enter 20°.Also in the Format Shape dialog box, click 3-D Format in the left pane, and then do the following in the right pane:Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left). Click the button next to Bottom, and then under Bevel click Circle (first row, first option from the left). Under Depth, in the Depth box, enter 200 pt. Under Surface, click the button next to Material, and then under Standard click Warm Matte (second option from the left). Click the button next to Lighting, and then under Neutral click Soft (first row, third option from the left). In the Angle box, enter 270°.Also in the Format Shape dialog box, click Shadow in the left pane. In the right pane, click the button next to Presets, and then under Perspective click Perspective Diagonal Upper Right (first row, second option from the left). To reproduce the text effects on this slide, do the following:On the slide, right-click the rounded rectangle, click Edit Text, then enter text. Select the text. On the Home tab, in the Font group, select Arial Rounded MT Bold from the Font list, and then select 36 from the Font Size list.On the Home tab, in the Paragraph group, click Center to center the text within the rectangle.Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click Text Fill in the left pane, and then do the following in the right pane:Select Solid fill. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 130, Green: 101, and Blue: 58.Also in the Format Text Effects dialog box, click Shadow in the left pane, and then do the following:Click the button next to Presets, and then under Inner click Inside Diagonal Top Left (first row, first option from the left).In the Transparency box, enter 25%.In the Distance box, enter 5 pt. To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then clickFormat Background.In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then clickLinear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until four stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 196, Green: 178, and Blue: 152.Select Stop 2 from the list, and then do the following:In the Stop position box, enter45%.Click the button next to Color, and then under Theme Colorsclick Tan, Background 2, Darker 90% (sixth row, third option from the left).Select Stop 3 from the list, and then do the following:In the Stop position box, enter72%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 66, Green: 62, and Blue: 50.Select Stop 4 from the list, and then do the following:In the Stop position box, enter100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 149, Green: 128, and Blue: 107.
- 2D - Something with 2 dimensions (flat)3D - Something seen in 3 dimensions e.g. width, length and height.4D - Adding the aspect of Time to a project (phasing/sequencing)5D - Adding the aspect of Cost to a project (cost estimating)6D - The aspect of Life Cycle Management (owner/FM