Редукторы конические Unimec // ваш поставщик - АРВЕ

1. UNIMEC bevel gearboxes have been designed and manufactured since 28 years using an in-
the van technology and mechanical solutions according to the state of the art to be able to
meet the growing requirements of a demanding and sophisticated market. Nine sizes, tenths of
mounting schemes,a range of serial ratios up to 1/12 and the possibility of a customized design
having no equal, make of UNIMEC a reliable partner in the field of the motion transmission.
The practical cubic shape of bevel gearboxes allows universal mounting possibilities on every
kind of machines.
Bevel gearboxes are also very versatile with regard to the shafts choice and the possibility of
a direct mounting on any kind of motors, from the normal IEC to brushless motors, to
pneumatic motors and so on. High running efficiency, low noise are the logical consequences
of the application of Gleason®
type spiral teeth conical gears; the use of this kind of geometry
and suitable thermal treatments place UNIMEC’s bevel gearboxes on top of this mechanical
sector.
164
Bevel gear boxes

2. 165

3. RC
Hollow shaft bevel gearboxes.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
RR
Hollow shaft bevel gearboxes with
reinforced hub shaft.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
RB
Broached hollow shaft bevel gearboxes
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
RA
Hollow shaft bevel gearboxes with shrink-
disks.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
RS
Protruding shaft bevel gearboxes.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
RP
Protruding shaft bevel gearboxes with
reinforced hub shaft.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
RX
Double hub bevel gearboxes.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
RZ
Double hub bevel gearboxes with reinforced
shafts.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
198
199
200
201
202
203
204
205
Application samples are online at www.unimec.eu - section Applications166
198
199
200
201
202
203
204
205

4. REA
High reduction hollow shaft bevel
gearboxes with shrink-disks.
Ratios:
1/4,5 - 1/6 - 1/9 - 1/12.
RES
High reduction bevel gearboxes with
protruding shaft.
Ratios:
1/4,5 - 1/6 - 1/9 - 1/12.
RHC
Inverted bevel gearboxes with hollow shaft.
Ratios:
1/2 - 1/3.
RM
Bevel gearboxes with fast double shaft –
multiplier version.
Ratios: 1/1,5.
RIS
Protruding shaft bevel gearboxes with
inverter.
Ratios:
1/1 - 1/2.
REC
High reduction bevel gearboxes with hollow
shaft.
Ratios:
1/4,5 - 1/6 - 1/9 - 1/12.
REB
High reduction bevel gearboxes with
broached hollow shaft.
Ratios:
1/4,5 - 1/6 - 1/9 - 1/12.
210
211
212
206
207
208
209
Application samples are online at www.unimec.eu - section Applications 167
productionline
210
211
212
206
207
208
209

5. RHB
Inverted gearboxes with broached hollow
shaft.
Ratios:
1/2 - 1/3.
RHA
Inverted bevel gearboxes with hollow shaft
with shrink-disks.
Ratios:
1/2 - 1/3.
RHS
Inverted bevel gearboxes with protruding
shaft.
Ratios:
1/2 - 1/3 - 1/4,5.
MRC
Hollow shaft motor-gearboxes.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
MRB
Broached hollow shaft motor-gearboxes.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
MRA
Hollow shaft motor-gearboxes with shrink-
disks.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
MRS
Protruding shaft motor-gearboxes.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
MRX
Two hub shafts motor-gearboxes.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
217
218
219
220
213
214
215
216
Application samples are online at www.unimec.eu - section Applications168
217
218
219
220
213
214
215
216

6. Special bevel gearboxesMRZ
Two hub shafts bevel gearboxes with
reinforced shaft.
Ratios:
1/1 - 1/1,5 - 1/2 - 1/3 - 1/4.
MRE
High reduction motor-gearboxes.
Ratios:
1/4,5 - 1/6 - 1/9 - 1/12.
Bevel gearboxes with clamps
on the motor shaft
productionline
221
222
Application samples are online at www.unimec.eu - section Applications 169
221
222