2. 2
ABOUT
Scubatech Co. Ltd. was established in
2002 by experienced instructors, Tri-
mix and rebreather divers. Our com-
pany manufactures the whole range
of high quality regulators dedicated
for diving in difficult weather condi-
tions which prevail in northern part of
Europe.
Our regulators have been success-
fully used for almost 13 years by
professional divers, marines, the fire
department and recreational divers.
Answering the needs of the develop-
ing technical market, we created a
new line of equipment called TECLINE.
This line consists of wings, harness-
es, regulators, SPGs, valves, thermal
undergarment, lights & others. This
equipment is dedicated to both div-
ers who have just began their adven-
ture with recreational diving and the
most demanding technical divers who
explore undiscovered places. Each
piece of equipment which we want to
introduce on the market is previously
carefully tested by our team. All of the
products fulfill the high requirements
of European norms and they are CE
certified.
Our perfection has been also appreci-
ated by many famous brands of diving
equipment and we are also proud to
be distributor of them:
Sitech, Ocean Reef, Pinaccle, DUI,
Faber, Eurocylinder, Luxfer, McNett,
Innobeam, Saekodive.
For more information
about the products,
please visit:
www.tecline.com.pl
or don’t hesitate
to contact us directly at:
scubatech@scubatech.pl
Tomasz
Stopyra
President
TECHNICAL DIVING EQUIPMENT
3. 3
Table of Contents
02 REGULATORS
16 buoyancy compensators
31 SS ACCESSORIES
32 Reels and spools
33 BUOYS
34 FRAMELESS MASKS
36 FINS
37 VALVES, TANKS, STAGE KITS
38 INSTRUMENTS, SPGS
39 accessories
40 LED LIGHTS
42 undergarments
43 AFTER diving
THE PERFECT
CONFIGURATION
FROM POLAND
- wherever you dive -
photo by Sebastian Rosiak
photo by oganowski.com
photo by Petr Vaverka
4. 4
REGULATORS V2 ICE
„V” SHAPE ALLOWS FOR KEEPING HEAD IN HIGH POSITION,
WHICH MAKES TRIM AND SAFETY MUCH BETTER.
VERTICAL PORTS’ SETTING RESULTS
IN PERFECT HOSES ARRANGEMENT.
UNIQUE CONSTRUCTION OF REGULATORS
ALLOWS FOR EASY VALVE ACCESS.
Joining the wings from Special Edition series (D17SE, D22SE,
D30SE) with V2 ICE regulators is the ideal solution for the
“tech” instructors’ teaching, apart from the other skills, the
proper trim and valves’ maneuvering. This means quicker way
for mastering these techniques for the students and the war-
ranty of incredible comfort while diving with the doubles for
the technical divers. The regulators are covered by a 10-year
warranty for the first owner.
V2 ICE first stage cooperates with most of the second stages of
other brands without the loss of warranty, so if you have your
favorite 2nd stage, you can simply use it with V2 ICE. The tools
needed for servicing do not differ from those used for the ser-
vicing of other popular regulators. Spare parts needed for ser-
vicing in the field are the same as in the most of the available 1st
stages–V2doesn’thaveinthisrespectanysurprisingsolutions…
maybe apart from one – this is V2 ICE – the only such regulator.
THE PERFECT
CONFIGURATION
DIR SET V2
• 2 x first stage left right
• 2 x second stages
• LP hose PROFLEX 2,00m
• LP hose PROFLEX 0,61m
• HP hose PROFLEX 0,61m
• SPG 52mm TECLINE
• 1 x SS swivel bolt snap
76mm
• 1 x SS swivel bolt snap
88mm
• 0,75 M bungee necklace
• Silicone necklace
• Regulator bag
DIR SET V2
CE1463
EN250
DONUTS SPECIAL EDITION SERIES
+ DIR SET V2 ICE REGULATORS
10 years warranty FOR THE first owner
5. 5
• Balanced
• Regulation of breathing underpressure
• Regulation of breathing resistance
• Breathing resistance : 0,983 – 1,004 J/l
• Maximum flow by 20MPa pressure: 850l/m
• Can be used with Nitrox up to 40%
• Material: polyamide
• Weight: 210g
REGULATORS V2 ICE
• Diaphragm
• Additional dry chamber: COLD KIT
• Balanced
• 2 LP ports / 1 HP ports
• Maximum operational pressure: 300 bar
• Maximum flow by 20 MPa pressure: 3823 l/min
• Intermediate pressure: 8,5 bar
• Material: maritime bronze
• Weight: 790g
• Can be used with Nitrox up to 40%
V2 First stage
REGULATOR LR
V2 SECOND stage
REGULATOR
3D
of I STAGE
3D
of II STAGE
10 years warranty FOR THE first owner
CE1463
EN250
6. 6
• intuitive work with the regulator by beginners
• safe layout of hoses without loops standing out
from the diver
• easy change of configuration from recreational
to technical DIR
• comfortable knob allowing for easy installation
of the regulator on valve
• safe arrangement of the 2nd stage of regulator
(“always in front of the diver”)
• configuration “Semi Tec 2”
(2 regulators V2 ICE MONO+ “T” valve) sets the hoses
in an exactly the same way as in the twin set, making
diving under ice even safer
• a large heat exchanger allowing for safe diving in low
temperatures.
• 1 x first stage V 2 ICE MONO,
diaphragm with Cold Kit,
• 4 x LP ports
• 2 x HP ports
• 2 x second stage V2, balanced with Venturi regulation
and breathing resistance regulation
• 1 x hose LP 61 cm
• 1 x hose LP 193 cm
• 1 x hose HP 61 cm
• 1 x manometer Tecline 300 bar
• 2 x SS swivel bolt snap
• 1 x bungee for hanging the second stage
• 1 x Tecline regulator’s bag
• 2 x first stage V 2 ICE MONO,
diaphragm with Cold Kit,
• 4 x LP ports
• 2 x HP ports
• 2 x second stage V2, balanced with
Venturi regulation and breathing resistance regulation
• 1 x hose LP 61 cm
• 1 x hose LP 193 cm
• 1 x hose HP 61 cm
• 1 x manometer Tecline 300 bar
• 2 x SS swivel bolt snap
• 1 x necklace
• 1 x Tecline regulator’s bag
REGULATORS V2 ICE MONO
For sets of double tanks we recommend the regulator V2
ICE in DIR-sets with dedicated left and right first stage .
A new regulator by Tecline, V2 ICE MONO, can be used by both
beginner and experienced divers, who like safe diving with
single tank in cold water.
We invite all those, who conduct classes for future technical div-
ers, to carefully get acquainted with Semi Tec configuration, which
allows for combining V2 ICE MONO with a single tank in a way which
reflects the twin configuration.
V2 ICE MONO
Essential features:
The set V2 ICE MONO Semi Tec 1
for tanks with a single valve
The set V2 ICE MONO Semi Tec 2
for single tank with double valve
CE1463
EN250
10 years warranty for THE first owner
7. 7
REGULATORS V2 ICE IN PRACTICE
25002000150010005000
3000
2500
2000
1500
1000
500
0
-500
-1000
-1500
-2000
-2500
A demand regulator V2 is a scuba regulator, which supplies air only when the diver inhales it (or “demands” it). It consists of 2 stages
(first stage of pressure reduction and second stage of pressure reduction), and intermediate hose dividing the stages of pressure
reduction. The trusted and newest solutions in regulators’ design were implemented while creating this device. The leading com-
panies producing diving equipment also use these solutions and they contribute to excellent parameters of V2. While describing
this regulator we can use technical terms like: dry chamber, downstream setup of pressure reduction, reduced pressure 0,95 MPa,
twisted connections of hoses, high quality low pressure hose with operational pressure 1,7MPa, adjustable inhalation knob, deflec-
tor properly directing the flow of breathing gas in connection with Venturi vane.
Equipping the first stage of the regulator with the so-called dry chamber (use of isolating membrane) proved to be beneficial during
the test of the regulator in cold water (so water which temperature is lower than 10°C). Taking into consideration the geographical
position of Poland as well as the thermal conditions in our lakes and the Baltic Sea, the increased resistance to freezing is a big
advantage of a regulator. V2 is not prone to freezing in cold water during hard work (consumption of air more than 62l/min). In case
of V2, laboratory and functional tests conducted in Laboratory of Polish Marine Academy in Gdynia on commission of the Polish
Register of Shipping confirm that the regulator is safe for use. The result of this test as far as the values of breathing parameters
are concerned places this regulator in a comparable position to regulators currently available on the market. The demand regulator
(breathing apparatus) V2 is air diving regulator perfect for use both in recreational and commercial dives. It is intended for use with
any set of air tanks with operation pressure up to 30MPa. It is compatible with all ranges of operation pressure of tanks currently
present on the market. This regulator can be successfully used in dives in cold waters as well as in expeditions into warm tropical
waters.
Apart from the tests conducted for us by the Polish Navy, we try to bring our regulators
under new challenges all the time. Our recent test: Depth 110 m, water temperature 8°C, bot-
tom time 30 min, total dive time 180 min. Dive place: a cave in Croatia.
Result of the test: high comfort in keeping the position by a diver, stable flow of gas during the
whole dive. V2 ICE regulators have been successfully used during the dives in closed spaces
like caves, flooded mines as well as wracks in Europe for the recent 6 months. The most
frequent operation temperature was 4-6 °C and the depth – 40-60 m. Gases used during the
dives: air, nitrox, trimix.
A graphic account of breathing parameters lets us read out the values of breathing
resistance as well as the value of total performance. The norm specifies maximum
underpressure of inhalation and overpressure of exhalation as follows: +2500Pa,-
2500Pa and the total performance on the level of 3,0J/l. On the basis of presented
chart and average values of all of the several inspections, which the regulators un-
derwent, it was established that the values lie within the norms and they still have
a big margin. Average values, which characterize this regulator, are: 1,35J/l for
breathing performance and +1500Pa and -1000Pa for underpressure of inhalation
and overpressure of exhalation respectively. The effort put into breathing is similar
to the work that necessitates other regulators currently available on the market.
In many cases V2 is competitive in comparison with them. Additional benefit is the ergonomic design and the configuration of fixed
AO components such as: standard (5/8”) two intermediate pressure ports as well as standard one high-pressure port (7/16”). The
advantage of using standard solutions in case of pressure joints is that the user does not have to bear the cost of additional reduc-
tions for configuring the regulator with other elements of diving equipment. Compatibility of this regulator is a very practical feature.
8. 8
regulators r5 series
R5 TEC
Designed for
cold water
diving.
• 2 x first stage R 5 TEC,
diaphragm with Cold Kit, 4 x LP, 2 x HP
• 2 x second stage R 5 TEC,
balanced with Venturi regulation
and breathing resistance regulation
• 1 x hose LP 61 cm
• 1 x hose LP 200 cm or 210 CM
• 1 x hose HP 61 cm
• 1 x SPG 300 bar
• 2 x SS swivel bolt snap
• 1 x necklace
• 1 x regulator’s bag
10 years warranty for THE first owner
CE1463
EN250
DIR set R 5 TEC
consists of:
9. 9
REGULATORS R5 ICE
• Regulation of breathing underpressure
• Regulation of breathing resistance
• Breathing resistance : 0,983 – 1,004 J/l
• Maximum flow by 20MPa pressure: 850l/m
• Can be used with Nitrox up to 40%
• Material: polyamide
• Weight: 210g
Regulation of breathing
resistance Wide exhaust cover
• Diaphragm
• Additional dry chamber: COLD KIT
• Balanced
• 4 LP ports, 2 HP ports
• Maximum operational pressure: 300 bar
• Maximum flow by 20 MPa pressure: 3823 l/min
• Intermediate pressure: 9,5 bar
• Material: maritime bronze
• Weight: 720g
• Can be used with Nitrox up to 40%
Pressure[Pa]
3000
2500
2000
1500
1000
500
0
-500
-1000
-1500
-2000
-2500
0 500 1000 1500 2000 2500
Volume [cm3]
-3000
Low breathing resistance 0,983 – 1,004 J/L
10 years warranty for THE first owner
Cross-section
First stage of reduction
R5 ICE
Second stage of reduction
R5 ICE BALANCED
CE1463
EN250
10. 10
10 years warranty for THE first owner
REGULATORS R2 ICE SERIES
OUR REGULATORS WERE TESTED IN LABORATORY OF POLISH MARINE ACADEMY IN GDYNIA
R2
ice
FIRST stage of reduction
R2 ice SPECIAL
The regulators from series 2, with excellent param-
eters, proved very well both in practice and in labora-
tory tests of Polish Marine Academy in Gdynia. On the
basis of tests, all of SCUBATECH regulators obtained
the certificates CE 1463 from Polish Register of Ship-
ping. These certificates state that our regulators fulfill
the requirements of EN250: 2000 norm, which defines
strict technical parameters for regulators designed for
cold waters. Regulators from series 2 have incredibly
low breathing resistance, which contributes to minimizing
air consumption.
• Diaphragm
• Additional dry chamber (COLD KIT)
• Balanced
• 4 LP ports, 2 HP ports
• Maximum operational pressure: 300 bar
• Intermediate pressure: 9,5 bar
• Material: maritime bronze
• Weight: 730g
• Can be used with Nitrox up to 40%
Second stage of reduction
R2 ICE
Made from maritime bronze with high heat
capacity ability to collect heat resulting
in increased resistance to freezing.
Diaphragm environment of work of high pressure
valve as well as the rest of outer elements separated
from the impact of outside environment.
Additional heat protection of a dry chamber “ICE” air
chamber separated by main diaphragm and diaphragm
of additional Cold Kit.
4 LP ports in rotating head – ideal solution for 1-tank,
recreational configurations as well as for technical
configurations with the use of 2 tank sets.
2 HP ports allowing for the use of both classical
manometer and a transmitter for computer.
Pressure[Pa]
3000
2500
2000
1500
1000
500
0
-500
-1000
-1500
-2000
-2500
0 500 1000 1500 2000 2500
Volume [cm3]
-3000
Regulation of breathing
resistance
Made of high
quality polymers
Brass cover of valve seat functions as additional protection
against freezing of 2nd stage.
First stage of reduction
R2 ICE
Low breathing resistance 0,983 – 1,004 J/L
CE1463 EN250
Fixed head
11. 11
REGULATORS R1 SERIES
10 years warranty for THE first owner
R1
Simple and reliable design of the first stage RG 1001
ensures high safety of scuba diving. Despite the fact
that it is a piston construction with open chamber,
it fulfills the demands of EN250: 2000 norm for cold
water regulators. On the basis of the users‘ expe-
rience and the results of the tests conducted by
laboratories of Polish Marine Academy in Gdynia,
we recommend these regulators for those diving in
cold waters from early spring until late autumn as
well as for teaching. Very good price, simple con-
struction which results in low cost of servicing as
well as resistance to bad treatment cause that these
regulators are used in diving centers in Poland, the
Czech Republic, Croatia, Egypt as well as the Crimea
and Lithuania.
+
Second stage of reduction
R1 PRO
• Regulation of breathing under pressure
• Maximum flow by 20 MPa pressure: 850 l/m
• Intermediate hose: black, 70cm
• Material: polyamide
• Weight: 180g
• Can be used with Nitrox up to 40%
First stage of reduction
R1 PRO
• Piston
• 3 LP ports, 1 HP port
• Maximum operational pressure: 300 bar
• Maximum flow by 20 MPa pressure: 3823 l/m
• Intermediate pressure: 9,5 bar
• Material: maritime bronze
• Weight: 515 g
• Can be used with Nitrox up to 40%
Each octopus is offered with 90cm, YELLOW LP hose
Octopus R 3TEC
CE1463 EN250
Octopus R3
12. 12
COMPARISON TABLE OF REGULATORS
R 1 PRO
R 1 PRO O2
R 2 ICE
R 2 ICE
Special
R 5 ICE
R 5 ICE
Special
First stage R 1 PRO / R 1 PRO O2 R 2 ICE
R 2 ICE
Special
R 5 ICE
R 2 ICE
Special
Water chamber
protected against
freezing ( ICE ) • • • •
Rotating head
•
Quantity of LP/HP
ports
4 / 1 4 / 2 4 / 2 4 / 2 4 / 2
Type piston diaphragm diaphragm diaphragm diaphragm
Maximum
pressure
300 bar 300 bar 300 bar 300 bar 300 bar
Intermediate pres-
sure (working)
9,5 bar 9,0 bar 9,0 bar 9,0 bar 9,0 bar
Maximum flow
at 20 MPa
3823 l/min 3823 l/min 3823 l/min 3823 l/min 3823 l/min
Ports at an angle
Nitrox up to 40% R 1 PRO
• • • •
Nitrox from 40%
to 100%
R 1 PRO O2
Weight 515 g 800 g 650 g 720 g 650 g
Material maritime bronze maritime bronze maritime bronze maritime bronze maritime bronze
Second stage R 1 PRO / R 1 PRO O2 R 2 ICE
R 2 ICE
Special
R 5 ICE R 5 TEC
Venturi regulation R 1 PRO
• • • •
Regulation of
breathing
resistance • • • •
Flow 935 l/min 950 l/min 950 l/min 950 l/min 950 l/min
Breathing
resistance
0,983 – 1,004 J/l 0,983 – 1,004 J/l 0,983 – 1,004 J/l 0,983 – 1,004 J/l 0,983 – 1,004 J/l
Inspiration
under pressure 35 – 42 mm/H2
O 32 – 42 mm/H2
O 32 – 42 mm/H2
O 32 – 42 mm/H2
O 20 – 38 mm/H2
O
Balanced
• •
Nitrox up to 40% R 1 PRO
• • • •
Nitrox from 40%
to 100%
R 1 PRO O2
Radiator
•
Weight 220 g 275 g 255 g 255 g 280 g
Material polyamide polyamide polyamide polyamide polyamide
13. 13
R 2 TEC
R 2 TEC O2
R 5 TEC
V2 ICE
V2 ICE MONO
R 3 OCTO R 3 TEC OCTO
First stage
R 2 ICE
R 2 ICE O2
R 5 TEC
Black
V2 ICE
V2 ICE MONO
Water chamber
protected against
freezing ( ICE ) • • •
Rotating head
•
Quantity of LP/HP
ports
4 / 2 4 / 2
2 / 1
4 / 2
Type diaphragm diaphragm diaphragm
Maximum
pressure
300 bar 300 bar 300 bar
Intermediate pres-
sure (working)
9bar 9,0 bar 9,0 bar
Maximum flow
at 20 MPa
3823 l/min 3823 l/min 3823 l/min
Ports at an angle
• •
Nitrox up to 40% R 2 TEC
• •
Nitrox from 40%
to 100%
R 2 TEC O2
Weight 800 g 805 g 795 g
Material maritime bronze maritime bronze maritime bronze
Second stage R 2 TEC / R 2 TEC O2 R 5 TEC V2 ICE R 3 OCTO R 3 TEC 0CTO
Venturi regulation
• • •
Regulation of
breathing
resistance • • •
Flow 950 l/min 950 l/min 950 l/min 935 l/min 935 l/min
Breathing resi-
stance
0,983 – 1,004 J/l 0,983 – 1,004 J/l 0,983 – 1,004 J/l 0,983 – 1,004 J/l 0,983 – 1,004 J/l
Inspiration under-
pressure 20 – 38 mm/H2
O 20 – 38 mm/H2
O 20 – 38 mm/H2
O 37 – 47 mm/H2
O 37 – 47 mm/H2
O
Balanced
• • •
Nitrox up to 40% R 2 TEC
• • • •
Nitrox from 40% to
100%
R 2 TEC O2
Radiator
• • •
Weight 280 g 275 g 270 g 220 g 225 g
Material polyamide polyamide polyamide polyamide polyamide
14. 14
10 years warranty for THE first owner
STAGE REGULATORS
• 1 x I-st stage R 2 TEC O2
• 1 x II-nd stage R 2 TEC O2
• 1 x LP hose green 1 m
• 1 x HP hose 0,15 cm
• 1 x SPG O2
• 1 x I-st stage R 1 PRO O2
• 1 x II-nd stage R 1 PRO O2
• 1 x LP hose green 1 m
• 1 x HP hose 0,15 cm
• 1 x SPG O2
STAGE SET R2 TEC O2STAGE SET R1 PRO O2
CE1463 EN250
O2 BAG FOR STAGE REGULATORS
15. 15
ARGON SETS
SIDEMOUNT REGULATORS
10 years warranty for THE first owner
R 2 TEC Sidemount set consists of:
• 2 x first stage R 2 TEC, diaphragm with Cold Kit
• 2 x second stage R 2 TEC, balanced with Venturi
regulation and breathing resistance regulation
• 1 x hose LP 65 cm
• 1 x hose LP 210 cm swivel 90 degrees
• 2 x inflator hose LP 20 cm
• 2 x hose HP 20 cm
• 2 x SPG 400 bar
• 1 x SS bolt snap 88mm
• 1 x necklace
• 1 x regulator’s bag
1st stage with integrated
over pressure valve
0,85L, 1,5L 3L
aluminum Luxfer
tanks
CE1463 EN250
16. 16
buoyancy compensators
Dedicated for perfect buoyancy
donut 22
High surface position
Easy valve access
Easy dump system
Compatible with all configurations
17. 17
This wing would be an ideal tool for both recreational divers
starting their adventure with twin sets and for advanced ex-
plorers diving each day with side tanks, scooters and other ad-
ditional equipment… this wing is called Donut 22 Special Edi-
tion.The first Polish wing for twin set 2 x 12l was created based
on the expectations of divers, instructors and thousands of
hours spent underwater in different equipment configurations.
The wing has a shape of uneven circle which allows for an ef-
ficient spread of gas in any direction and, in the same way, for
keeping the chosen position under the water. Making the wing
wider and a special pad sewn in the outline of the wing resulted
in a good positioning of the diver even when diving with addi-
tional tanks. The pad has additionally increased the wing’s ca-
pacity without making its outline bigger – the result is a small
wing with big capacity. A wide strip in the lower part of the wing
allows for the use of this additional capacity giving the diver a
“high” position on the surface. A stable position under water
can also be kept due to easy release of gas. The back valve was
placed in an intuitive position. We simply find it when we place
our hand on the dump valve. The inflator is placed centrally so
that its port is positioned exactly between the tanks. This al-
lows for gas release through the inflator without the need for
strong leaning backwards. The wing is also sold with additional,
shorter inflator’s hose allowing the diver to choose the size ac-
cording to his/her preferences. The wing is very narrow in the
upper part allowing in this way for virtually unlimited possi-
bilities of hoses and regulators’ configurations. It also ensures
easy access to the valves. Positioning of the wing against the
set and plate can be established by choosing one of the two sets
of holes for screws mounting the wing on the tanks. The proto-
type of the wing was carefully checked – before the mass pro-
duction began our tester had done about 200 dives with it, in the
Baltic Sea, lakes, quarries, Florida caves, flooded underground
and… pools with chlorinated water. The tests have shown that
the wing’s materials are really resistant and that the equipment
is extremely comfortable to use.
DONUT 22 SPECIAL EDITION
overpressure valveinflator mount inflator
• Small size that goes with proper capacity and simple, safe
construction
• Stable position underwater with doubles and several stages
• Streamlined shape allowing for entering the narrow spaces
• Durable material – UV resistant and tough
• Capacity big enough to keep a diver with doubles and 1 stage
in high position above water
• Quick release of gas in each position with the use of both
inflator and a dump valve
• Separated placement of the hoses regardless the type
of regulators being used and the configuration
• Safe and easy access to valves both under the water
and on the surface with the wing fully filled
What is the ideal wing
for the 2x12L set?
Below is the list of the crucial criteria:
More information on how the wing was being created
can be found on the internet forum Divetrek Group:
https://www.facebook.com/groups/166781186689889/
A film showing how easy it is to use the Donut 22
Special Edition can also be found there.
.
Swimming
pool test
How is Donut 22SE
built?
See Donut 22SE
in action
Tecline TV:
CE CERTIFIED CE1463 EN1809
18. 18
TECLINE DONUT 22 SE RED - LIMITED EDITION
DONUT 22 RED
CE CERTIFIED CE1463 EN1809
19. 19
DONUT 22 SE REBREATHER VERSION
As an Instructor Trainer, scientific diver and Explorer quality,
well-made reliable equipment is quite simply ‚life support’.
I have worked with Tecline over the last few years, teaching
CCR classes for their customers, presenting on product at dive
shows and consulting on Tecline product and when offered the
opportunity to work with Tecline in the design of a CCR specific
wing/BC was excited at the prospect. Through various prototype
phases of development and design we arrived at the Tecline Do-
nut 22 SE’. The aim was to make a tough, functional, reliable and
long lasting product that specifically met the needs of the Tech-
nical CCR Diver. Many CCR have a lot of weight in the lower sec-
tion with 1st stages and cylinder valves in this position and are
buoyant in the upper section due to the counter-lung/lungs. The
Donut 22 SE was designed to offer a larger buoyancy chamber
at the base and smaller at the top to specifically meet the trim
requirements of CCR Diving. The fitting of the inflate mecha-
nism and dump to rubber plates add strength and longevity to
the design and, as with all Tecline product I have personally
used to date, build quality and materials are exceptional.
Phil Short has been diving for over 20 years. During this time he has logged over 6000 dives with over 3000
hours on rebreathers. Phil deals with preparing and testing rebreather systems; he is also a trainer prepar-
ing both new divers and other instructors for CCR diving. He has been taking part in many diving expeditions in plac-
es never visited before. Phil has also cooperated with many scientific organizations in the field of underwater research.
He acts as a dive industry consultant for many diving equipment manufacturers.
REBREATHER buoyancy compensators
„I know that well-made, reliable
equipment can save your life”
Phil Short REVIEW www.philshorttechnical.co.uk
Phil Short
RB
FOR SENTINEL AND MANY OTHER REBREATHERS
CE CERTIFIED CE 1463 EN1809
20. 20
DONUT 17 SPECIAL EDITION
CE CERTIFIED CE1463 EN1809
Safer dives under ice with double set 2 x 7 and a wing Donut
17SE as well as with V2 ICE regulators. Recreational divers are
more frequently turning to double sets. The set 2 x 7l is far more
functional than a single tank and, at the same time, it can be
lighter than this. It is safer, while also helping to maintain the
correct position under the water, which can be crucial during
dives under ice. D 17 SE design not only allows you to easily con-
trol the buoyancy, but also provides a stable and high position
of a diver on the surface of the water. Beginners are most afraid
of losing control of buoyancy - Donut 17 Special Edition simpli-
fies perfecting this skill. The biggest surprise for recreational
divers is much greater sense of comfort when you change the
configuration from a single tank to a double set. The reason is
the use of 2 elements: Donut 17 SE wing prepared especially for
those diving in double set 2 x 7l and the set of V2 ICE regulators.
Do you have any doubts? See for yourself!
Find out how Donut 17 SE will improve the comfort of your
dive. Try the set: a wing + double set 2x7 + V2 ICE regulators.
Become an aware recreational diver- get ready for the dives
under ice right now!*
Instructors conducting intensive training in double sets appre-
ciate the advantages of set D17SE + V2 ICE as an exact copy
of the larger double sets, allowing them to use these kits to any
presentations. 5-year warranty on Donut 17 SE gives a sense
of security also for the professionals.
* Using double sets requires knowledge of the principles of safe
diving in such a configuration. Ask your instructor how to safely
dive in double sets.
DONUT 17
Safer dives under ice
with double set 2 x 7
and a wing Donut 17 SE
as well as with V2 ICE
regulators.
21. 21
DONUT 30 SE
donut 30
Donut 30 Special Edition is a wing for divers with the highest
expectations as far as equipment is concerned. Prepared for
explorers and divers using big double tank sets and advanced
multistage techniques. Made from advanced materials which
allows swimming through cave restrictions or narrow passag-
es inside wrecks with no impact on the wing condition. Intuitive
gas dumping with no need for changing the position while DPV
diving. The wing’s shape enables desired hoses and regulators
configuration and leaves a lot of free space behind the diver’s
head at the same time. This wing keeps the diver equipped in 2
x 20 liters twin together with 6 big stages on the surface with
ease. Asymmetric construction of the lower part of the wing
supports rescue action when unconscious diver on the surface
involved. The wing works perfectly with the sets 2 x 18l and
American 2 x 125cf.
Donut 30 SE in action Donut 30 SE Donut 22 SE Easy valve access
• Easy buoyancy control even when using multistage and DPV
• Capacity which keeps a diver high on the surface even with
full set and many stages
• Enough space for hoses in any configuration
• Easy putting on and removing
• Possibility to apply many batteries on the harness
• Made for easy stages rotation and DPV diving
• Comfortable position on the surface makes conducting
a rescue operation easy
• The possibility to apply a big tank with argon without losing
the wing’s geometry
YouTube
Tecline TV:
Donut 30SE
swimming
pool test
Donut’s features:
Dedicated for perfect
buoyancy
CE CERTIFIED
CE1463 EN1809
22. 22
STANDARD DONUTS
The set consists of the wing Donut 15 or Donut 17 (chosen by the buyer), harness
DIR on aluminum backplate Combo 3mm, belt for a mono tank as well as 2 trim
pockets and 2 weight pockets. Due to the usage of Combo type backplate there is no
need for a separate mono tank adapter.
Set weight: 3,2 kg!
Donut 15 Donut 17 Donut 22 Wing 25
Ultra Light travel set
Donut 15 Donut 17 Donut 22 Wing 25
Built-in mono
tank adaptor
CE CERTIFIED CE1463 EN1809
DONUTS:
CE CERTIFIED CE1463 EN1809
24. 24
professionals insights
We asked a couple of people who deal with scuba diving in a professional way which BCD they use and why.
Here are their answers
I use TECLINE Donut 22 for technical dives and trainings.
This wing is ideal for me on the depth 50-90m with a set 2 x 12l
and with a set of 2 to 4 stages. The wing’s shape of a donut,
like a tire, makes it easy to adjust the buoyancy without the need
of changing the trim. Such shape also helps in coming back to the
surface in a horizontal position. Although I have been using this
wing for over a year now, I evaluate its performance and construc-
tion very highly. Despite using the product quite regularly, it has
virtually no signs of wear.
PADI Platinum Course Director
DSAT Tec Trimix Instructor Trainer
Michał Kosut
I have known the Tec Line products for a long time. Running
the company Centrum Nurkowe Tryton (diving centre “Tryton”),
I have a pleasure in testing and checking most of the products
available on the market. I like the wing Donut 22SE because of
its construction and affordable price. It matches ideally to the set
and it doesn’t collide with hoses and manifold from double-tank set.
In my view, everyone who dives in this wing even once will never
want to replace it with any other product.
Instructor Trainer SSI, Instructor PADI, CMAS, IANTD,
DAN, HSA. Cofounder of BalticTech conference and
BalticExplorers group
Krzysztof Wnorowski
I was using Halcyon Explorer 55lbs for a long time. But I’ve been
using Tecline Donut 22SE since recently and I really appreciate it
for: easy flow of gas inside the wing which results in easy disposal
of gas; ideally positioned back valve, for which I reach
in an intuitive way without having to search for it; for its shape
giving me a very good trim underwater and keeping my head high
above water when I’m on the surface. This wing also doesn’t give
you the feeling of squeezing your body when it’s fully pumped on
the surface. I really recommend it!
IANTD Instructor, www.trembowel.pl
Jacek Trembowelski
I spend about 800 hours underwater each year in different weather
conditions. I use Tecline Donut 22 Special Edition which was
designed by me. I consider this wing to be an optimal solution for
dives with 2 tanks with many side tanks and additional equipment.
Wreck and cave diver, Instructor of GUE, IANTD, PADI,
CMAS, professional tester of diving equipment
Wojtek A. Filip
I use this wing during my dives together with a set 2x 12l or PSCR
TresPreseidentes 2x8,5l. It’s the best wing I have dived in for the
last 15 years. I use this wing for both recreational dives and dives
during the courses when I give it to my students.
It helps them to learn to control their buoyancy and proper position
underwater in a quicker way. As a user I mainly appreciate this
wing for its shape in the upper part which makes it easy to properly
position the inflator hoses. It is possible thanks to
a small amount of fabric in the wing’s upper part. Properly positio-
ned exhaust valve allows for the release of gas without the need to
change the position underwater. Apart from that,
the well chosen inflator valve lets me add even the small amounts
of gas. Now I am waiting for a bigger brother of this version so that
I can use it with sets 2x20 and PSCR 2x12 and 2x20.
IANTD Instructor Trainer Normoxic Trimix
IANTD Trimix Instructor
IANTD Technical Wreck Instructor
Sebastian Popek
Tymek Podgórczyk
Excellent and well thought out wing. Efficiency and positioning of
back valve (flush) and the inflator makes the release of gas very
simple both from the upper and lower valves. Low profile
in the upper part of the wing results in the fact that there is
no problem in placing the hoses in a proper way, even if the tank is
lowered on the tank band. I successfully use the wing with 2x12l set
as well as for the rebreather with a frame 2x8,5l. I am looking for-
ward for the bigger brother of Donut 22 SE dedicated to sets 2x18
and 2x20l, which, I hope, will soon be available.
IANTD Technical Wreck Instructor
I have used different wing concepts, from dualbladder, bungee to
plain simple both horseshoe and donutstyle. The Tecline Special
Edition is the best of them all.A sturdy and well thought out design,
loads of room on the topside for hoses and valve management. The
bottomside creates a lot of lift when on the surface but not too much
bouyancy when diving. Whether I’m cleaning North Sea wrecks,
diving river based archeological sites, caves, GUE Project Baseline:
The Netherlands or just for fun I trust this wing completely.
GUE Cave1/Tech1
Ivar ‚Thor’ Klerks
I have been using a variety of wing and backplate configurations
from just about every major manufacturer, over the years to accom-
modate my needs for wreck diving. The Tecline D 22SE has got it
right. The compact design provides excellent trim characteristics
and streamlining. I was also quite impressed with the ease of gas
flow through the bladder. Retaining a horizontal position in the wa-
ter column, even with a heavy load of steel cylinders at the end of
the dive, is that much easier. I look forward to putting this bladder
to a lot more use.
TDI Instructor Trainer
MItchell Lepine
I have been using the Tecline special edition wing for the last
6 months. I have found it to be one of the best I have ever used. It
trims out perfectly and when either under the water or on the sur-
face is extremely comfortable. When the wing is fully inflated I have
found that my suit inflation cylinder nor my canister from my torch
are pushed uncomfortably into my back un like many other wings on
the market. Despite the constant use it has had
it still looks as good as new.
PADI/Iantd instructor
Shawtek equipment sales and training
John SHAW
After diving several different Wing-Systems from different manu-
facturers, I am now using only the Tecline 22 Special Edition Donut
Wing. The system works perfectly with a different range of double
tanks for both recreational and technical diving and it’s design
always allows it to be as streamlined as possible.
Even the harsh conditions of the Canadian winters on our east coast
have no effect on this great wing. I am really satisfied with it’s
performance.
Instructor SI Explorer
Michael Gerhartz
25. 25
Sofie Hostyn REVIEW
TECLINE DONUT 17 WING HARNESS
I am a sport diver, a recreational diver. I dive with a single
cylinder and have no technical ambitions at all. These I leave to
my husband. I appreciate that he has a thing about caves and
deep shipwrecks but I do not share this obsession. I also un-
derstand how important it is that he has the right equipment
for this type of extreme diving and how essential it is that the
equipment should be set up correctly.
In my 15 years of diving, all my BCDs have been bought off the
shelf. I choose the make and model, try it on, take it home and
go diving – as simple as that. If it later turns out that there is
something I don’t like about it, I just say “oh well!” to myself and
carry on. One of the elements of technical diving that has piqued
my interest over the years is how much effort is spent on getting
the “gear / rig / kit” customised to suit each diver’s needs and
personal preferences. This means that the equipment needs
to be extremely versatile, especially the wing and harness
style BCDs that technical divers use. I have always found this
flexibility to be an attractive concept.
So when I saw that Tecline had developed a wing and harness
specifically for single cylinder divers I was intrigued by the
idea. Then, when I read further and saw that they had a version
that weighed only 3.2 kgs, I was sold. I travel a lot on small air-
craft to remote places for a lot of my diving so keeping baggage
weight and excess charges down is a major priority. So I put in
my order for an ultra-light travel kit of Donut 17 wing with DIR
harness and aluminium backplate.
First Impressions
Having been accustomed to just using my dive gear “out of the
box,” I felt a little daunted by the mass of webbing that greeted
me when I opened the package. Of course, it makes complete
sense that enough webbing should be included for even the
largest of divers and I swiftly started adapting the straps to my
size. The webbing moved smoothly through the grooves in the
backplate, it was easy to adjust the belt slides and D rings and
within a few minutes I had a well-fitting harness. All I had to
do then was cut off the excess, leaving a fairly long tongue for
when I need to adjust the fit for diving with my drysuit.
I was impressed with the provision of two cylinder bands in-
stead of one. This is a safety feature that makes so much sense.
I wonder why the manufacturers of conventional BCDs do not
use two bands. You so often see divers in trouble because their
cylinder has dropped through a single band. I also noticed how
well made everything was: all the edges on the backplate were
smoothed off, the webbing was strong yet soft and pliable and
the sewing on the wing was almost invisible, so close were the
stitches.
Storage
The absence of pockets was initially disconcerting but my hus-
band showed me how my dive light fit snugly underneath the
two rubber loops provided at the bottom of the left shoulder
strap and my safety sausage slotted easily under the loops on
the other side. There was plenty of space on the waist harness
to add a zippered pouch if I needed to carry other things but for
now I had nothing else I needed.
Diving
This was the first time I had dived with a wing and harness and
also the first time I had used a crotch strap. I thought I would
find it strange but I did not even notice it. The whole set up felt
immediately comfortable and the absence of bulky BCD panels
and pockets under my arms meant that I could move my arms
much more freely than ever before on a dive.
Trim weight pockets had been provided as standard, attached to
one of the cylinder bands and I spread my weight between these
instead of wearing a weight belt. This was not a huge success as
I felt that the additional weight gave the cylinder a tendency to
try to roll me onto my back. So for my second dive, I moved the
pockets to my waistband, threading them on and holding them
in place with a belt slide. This was much more successful and
the exercise was a perfect demonstration of how flexible the
system is. If you find something that is not to your taste, you can
just change it.
After only a couple of dives I was converted! I was diving with a
device that, when inflated, gave me more buoyancy on the sur-
face than my previous BCD but, when deflated during my dive,
was less buoyant because of the absence of unnecessary bulk.
Therefore I needed less weight: a major bonus that I had not
anticipated! I had chosen the Donut 17 wing; with an alumini-
um cylinder and in warm water I would have been fine with the
smaller 15kg wing too.
I was more comfortable, had more freedom of movement and
easier access to my torch and safety sausage, as all I had to do
to deploy them was pull them out of the rubber bands, rather
than unzip a pocket. I had a heavy duty D ring half way up each
shoulder strap to clip my gauge and alternate second stage off
to and I had been able to adjust these to exactly the height I
wanted them at.
Then, when I came to place my bag on the airline scales before
our dive trip to West Papua last month, I found that my luggage
was underweight for the first time ever! I felt truly enlightened
– in all senses of the word!
Converted! A Sport Diver’s Path
to Enlightenment.
Sofie Hostyn IANTD South East Asia
Sofie Hostyn
26. 26
Simon Pridmore REVIEW
TEST OF DONUT 22 SPECIAL EDITION
INDEPENDENT
“Sometimes you need to
step back to move forward!”
Simon Pridmore
Regional Training Director
IANTD South East Asia
Author Scuba Confidential
Bali Indonesia, June 2013
Tecline redefines the state of the art in wing and harness design
with a return to the roots of technical diving Technological evo-
lution often tends to move users from simple tools to more com-
plex machines, but, paradoxically, development in the opposite
direction can sometimes be more effective. This has certainly
been the case in respect of buoyancy devices for technical divers
and the new simple harness / stainless steel backplate and Do-
nut 22 Special Edition Wing combination from Tecline raises the
bar in terms of quality, simplicity and effectiveness of design.
An Historical Perspective
I first encountered these guys ten years ago in their early days.
Then they were developing gear for technical divers in Central
Europe who were demanding equipment that matched high
quality with low cost. This seems to have been the company’s
unofficial slogan over the years and, as it has taken its busi-
ness worldwide, Scubatech / Tecline has kept faith with its busi-
ness model of building excellent products and selling them at
reasonable prices. In the early days of technical diving, small
companies and talented individuals created simple wings and
harnesses for the relatively small number of people that need-
ed them. Then, sensing the arrival of a promising new income
stream, the major manufacturers moved into the technical mar-
ket place and built complex, cantilevered systems designed by
engineers rather than divers. Nobody wanted them!
So the equipment began to evolve in another direction, with products that retained the simplicity of the original concepts but added
quality of materials, finishing and versatility. This Tecline offering is the latest evolutionary step.
The State of the Art
As you will see, I am a big fan of the system. Why do I like it so much? First, the Tecline folk have intelligently designed the Donut 22
Special Edition wing specifically for divers using double aluminium 12 litre (80 cu ft) cylinders, by far the most commonly available
set up in the world for travelling divers like me. You know you have a good piece of kit from the moment you open the box. The steely,
solid shine of the backplate with its bevelled edges, the strength of the webbing with the ends sealed to prevent fraying, a choice of
short and long corrugated hoses, pre-bent stainless steel D rings on the shoulders, a selection of other D rings elsewhere, including
two on the crotch strap: the signs of a meticulous attention to detail are evident everywhere. The harness and backplate fulfil their
primary function perfectly, i.e. to keep the diver permanently attached to his gas supply and help him remain as stable as possible
in the water while he breathes from that gas supply.
27. 27
INDEPENDET TEST OF DONUT 22 SE
The 2” webbing used is extremely strong and comfortable and
the harness allows the diver to fit attachment points, pouches,
sleeves and pockets according to his personal configuration
preferences. It does not dictate where these should go but al-
lows the diver complete freedom.
To be useful, a wing must not introduce complexity to the diver’s
set up. Again, it just has to do what it is supposed to do with no
fuss. Its principal function is to offer sufficient positive buoy-
ancy to keep a diver comfortable on the surface with his head
well clear of surface chop: and the expansion panels built into
the fabric of the Donut 22 Special Edition wing for exactly this
purpose do an excellent job.
Underwater, a wing must create minimal drag and have as
little integral positive buoyancy as possible to avoid the
need for a diver to carry additional weight in compensation.
The Special Edition is astonishingly slim-line considering its
22 kg lift capacity. With the stainless steel backplate, wearing
a 3mm wetsuit and carrying double aluminium 12l (80 cu ft) cyl-
inders and an aluminium 3l (30 cu ft) stage cylinder I need no
additional weight at all. And even when swimming against a cur-
rent, I feel no additional drag at all, even with the cell partially
inflated at depth.
A wing must also not disrupt a diver’s trim and, cleverly,
the circular “Donut” shape of the air cell ensures even distribu-
tion of buoyancy over the diver’s back to help keep him flat with
butt and legs horizontal. This is a welcome return to the original
concept of a cave diver’s wing. All I need to do is add a couple
of spurts of air, wriggle around a little so the air can circulate
around the cell, then set off. I have perfect trim instantly!
I really like the central position of the inflator hose elbow, which
keeps it completely out of the way of valves and regulator first
stages and allows greater flexibility with hose placement.
Another indicator of the level of thought that has gone into the
design of the wing is the fact that the upper panel has been
deliberately made slimmer and less bulky to facilitate hose
and regulator configuration and make it easier for a diver to
reach back and manipulate his valves, even when the wing
is fully inflated. The butt pull release is on the left and easy
to find. This kit is just so straightforward to use!
Going Back to Move On
It seems strange to write of evolution when describing equip-
ment that owes its design to the early days of technical
diving but progress does not always involve forward movement.
Sometimes you have to retrace your path in order to find the
right road!
THE PERFECT
CONFIGURATION:
DONUT 22 SE
+
DIR SET V2 ICE
REGULATORS
28. 28
SIDEMOUNT SYSTEM
• Cordura 2000
• Lift capacity 16 kg / 35 lbs
• 6 weight pockets max 16 kg
• Aluminum backplate
• Adjustable waist belt
• Additional chest belt
• Crotch strap
• 7 stainless steel d-rings
• Inflator 13” / 33 cm
• 1 x release valve
• Free size
Sidemount configuration was used by the early cave explorers,
looking for a way to transport their tanks comfortable in the dry
cave sections and being able to pass through narrow restrictions
under water and if necessary to completely remove and replace
the tanks under water. In those early pioneer days there were no
commercial sidemount sets available, so self-constructed har-
nesses were used to hang the tanks more or less on the side and
a couple of regulators in a recreational configuration to com-
plete the setup. That was it and it worked, most of the times.
Things evolved a lot since those pioneer days. Materials and de-
signs got much better. The general diving philosophy empha-
sized a lot more on safety, resulting in more specialized and
thorough dive training. But most importantly, many of those DIY
sets, be it backmount, sidemount etc. were crystallized by the
dive gear manufacturers into commercial available kits.
The last 5 years, diving with side mounted tanks changed from
being a necessity for cave explorers into a well appreciated and
comfortable way of diving for the mainstream diving (recre-
ational and technical) population.
Many brands jumped on this new phenomenon and created SM
sets just to have a SM set in their product range. Some were suc-
cessful, many others not.
Tecline took another approach and listened to the needs, experi-
ences and wishes of SM divers (both rec, tec and cave) and used
this as a guideline to create the ultimate SM set.
The main goal with this approach was not to create another new
sidemount system just for the sake of it. No, this was all about
creating a robust, clean and simple to use sidemount set both
for recreational and technical SM divers.
The base for the Avenger was Tecline’s sidemount set, SIDE 16.
The SIDE 16 is a good SM set but still left enough room for im-
provement. And so it happened. Michaël Doumont (XperienceDiv-
ing / MDSTechnology) and Karel Levrau (Narcotec) disassembled
the SIDE 16 and rebuilt it with a fair deal of improvements.
After a lot of testing and fine tuning the details and improve-
ments, they claimed this remodeled Tecline SM set to be the ul-
timate in SM diving. So this is how Tecline’s SIDE 16 AVENGER
was born.
SIDEMOUNT BCD SIDE 16
AVENGER
SIDEMOUNT BCD SIDE 16
POSSIBILITY
TO MOUNT
INFLATOR
ON LEFT OR
RIGHT SIDE
29. 29
SIDEMOUNT AVENGER
The AVENGER has a clean and simple DIR harness with the necessary
D-rings and crotch strap evidently. This harness can easily be adjusted
both on the attachment points on the back as on the waist, without the
complexity of many other SM sets. This makes the AVENGER an excel-
lent set for e.g. teaching as it is the easiest and fastest adjustable SM
on the market. The AVENGER is a real “plug and play” system. Because
the webbing for shoulders and waist are separate, they can be different
in thickness, flexibility in this way offering a lot of possibilities to cus-
tomize your comfort level. The harness and bladder act as 1 unit when
assembled. This allows for super easy getting in and out of the set.
Under the bladder of the AVENGER there are 4 fixed weight pockets
which can hold up to a total of 10 kg. The position of this weight
pockets, slightly more downwards and outwards, offers a more stream-
lined profile compared to sets which have the weights on top of the
spine. Putting these fixed weight pockets more downwards also gives
a much better trim as the weight of the tank valves are compensated
better in that way. A little more weight downwards will also help a lot of
dry suit divers getting the perfect trim. If 10 kg is not enough, 2 more
trim pockets can be added, left and right, to the waist belt. These pock-
ets come in 2 sizes: 2 kg each or 4.5 kg each. So no more need to attach
weights with tie-wraps on pieces of the harness everywhere.
The AVENGER’s bladder went through a few changes, too. The inflator
corrugated hose on the bladder can be repositioned coming from either
the right or the left. The other port then can be used as dump valve or
OPV. On the lower part of the bladder an extra dump valve is added. The
position of this extra dump valve is in the arched, thus lowest, part of
the back and doesn’t hinder while going through restrictions, etc. The
highest section of the bladder has been cut a bit so as not to increase
the divers profile. The trim pocket in this section has also been re-
moved for the same reason.
The waist belt is also separately adjustable from the shoulder straps.
Again, this allows for quick adjustments when needed. The waist belt
comes standard with the extra hard webbing, allowing for easy adjust-
ment of the sliding D-rings while diving in order to maintain the perfect
trim for the tanks. The waist belt attaches to the bladder much more to
the inside, allowing to move the sliding D-ring much more backwards.
This can come in handy when diving with heavier steel tanks for exam-
ple. This way of attaching the waist belt to the bladder allows the blad-
der to better wrap around the diver and as a result is more streamlined
than most other SM sets.
The AVENGER comes with a beaver tail which can be removed. The bea-
ver tail with the 3 sectioned fixed D-rings is preferred by many SM div-
ers diving with steel tanks, but is also a handy storage point for your
extra gear, pony bottle, battery pack, .... With the beaver tail detached,
the holes can be used to attach a battery pack, your pouch with extra
gear, etc.
Attaching the cylinders depends on your personal choice and some-
times also on the tanks used (heavy steel vs aluminum) and can be done
either with a floating bungee or fixed bungee with bolt snap. Both items
come with the kit.
Why is the AVENGER your choice ?
CE CERTIFIED CE1463 EN1809
30. 30
BCD
• Cordura 2000
• Lift capacity 22 kg / 50 lbs
• Aluminum backplate
• Adjustable waist belt
• Additional chest belt
• Crotch strap
• 8 stainaless steel d-rings
• Inflator with release valve
• 1 x release valve
in the back
• 1 x release valve on the shoulder
• Sizes: S/M, L/XL
• Small front pocket
• 2 x cargo pockets
• Integrated weight system
max 16 kg
JACKET BCD EXPLORER
CE CERTIFIED
CE1463 EN1809
31. 31
D-ringsB-rings SS BUcKLES
BRASS BOLT SNAPS
SS BOLT SNAP - „D” type EYE „O” type EYE
ss buckles
triglidersoval oval
brass dOuble enders
56mm x72mm/ Ø 6mm
72mm
88mm
100mm
115mm
120mm
56mm x72mm/ Ø 6mm
base 22mm x 60mm
50mm x 60mm x 80mm
45° 90°
L= 76/86/88/100/120mm
50mm x 60mm x 91mm
46mm x62mm/ Ø 6mm
base 32mm x 62mm
22mm x 60mm x 50mm50mm/ Ø 6mm
L= 90/100/115/120mm
ss slam snaps
L= 60/70/80/100/110/120mm L=80mm/100mm
STAINLESS STEEL ACCESSORIES
60mm/ Ø 6mm
115mm
SS DOUBLE ENDER SNAP
90mm 100mm
32. 32
Reels and spools
SpoolS with SS snapS Spool with winch
Cold Water SpoolS WITH SS snapS
TecLine reelS
TecLine reel Explorer Cave
L = 45m
L = 30m
L = 15m
L = 40m
L = 130m/400ft
L = 260m/800ft
L = 30m
L = 15m
33. 33
Semi-closed buoyS
OPEN BUOYS
closed buoyS
BUOYS
Closed buoys
orange/yellow 11/117
cm, OPR valve
Closed buoy
22/180cm
OPR Valve
Semi-closed
buoy 18/122m
OPR Valve
Dual-Color
OPR valve
orange/yellow
Open buoy
25/122
Metal oral valve for buoy
34. 34
FRAMELESS MASKS
• Exceptional view of 170 degrees thanks
to a short distance between glass and eyes
• Enlarged angle of view downwards
• Very small capacity
• Metal strap buckles
• Small size and weight
• Ultra light
• Soft, black silicone glued directly
to the mask’s glass
• Perfectly adhering to face
• Neoprene strap with Velcro optional
The widest view from all of the frameless masks available on the market. It fits ideally to the face
and requires small quantity of gas to clear it from water. Hydrodynamic shape allowing for direct
draining of exhaled air away from the diver’s view.
Frameless - super View
Neoprene strap
- optional
37. 37
VALVES, TANKS, STAGE KITS
TANKS AND DOUBLE TANKS
STAGES AND STAGE RIGGING KITS
Eurocylinder, Faber, Luxfer Catalina
Delrin Thumbwheels
SS tank bands
VALVES MANIFOLDS
38. 38
INSTRUMENTS, SPGS AND accessories
INSTRUMENTS, SPGS ELASTOMERIC MOUNTS
LINE MARKERS CookieS Pig tail
SS bolt snap
with bungee 6mm
Available colors:
NYLON BRAIDED „proflex” hoses
with
elastomeric
bungee mount
compasses
X7
X7 with strap
STANDARD RUBBER HOSES
LP
LP
HP
HP
39. 39
accessories
WETNOTES in CORDURA MIRRORwrist Slate
Set of Tecline traveling bags - 3 pcs
Medium and big bags:
• the newest system of 4 multidirectional
wheels on ball bearings, screws and
nuts made of stainless steel
• ergonomic and comfortable, telescopic
handle on aluminum brackets
• made of Nylon 2520 Denier resistant to
stains from water and dust
• additional handle on the bottom making
loading and unloading easier
• tough and durable zips with big
handholds ensuring easy opening and
closing
• multi purpose outer pocket
• additional nylon cover for the whole bag
Big bag:
• size: 43,5 x 27,5 x 81,5 cm;
• weight: 4,9 kg
Medium bag:
• size: 36 x 24 x 61 cm
Small bag:
• ideal for traveling and everyday use;
• made form Nylon 1680 Denier;
• big, multipurpose pocket;
• removable shoulder strap;
• size: 48 x 19 x 31 cm;
• weight: 1,5 kg
40. 40
LED LIGHTS
LED-17 HEAD LIGHT
LED LIGHT US-13
LED LIGHT US-15 COMPACT
LED LIGHT US-13 RECHARGEABLE
Dive mask light (Dive headlight) is a state of the art, ultra compact and super light weight
aluminum dive mask light, possibly the most powerful dive mask light on the dive market
with such tiny dimensions. Tecline LED -17 No. 1 Dive mask light provides you with the
much necessary illumination of instruments and gear during night dives. It is depth rated
to 120m, so you don’t have to worry about your instruments in low light situations. The dive
light provides just enough light without blinding your dive buddy when he/she is looking
at you. This little fantastic dive mask light is perfect for attaching to your mask strap and
provides an intense convenient ray of light. Comes supplied with an innovative mask at-
tachment clip for secure fastening to mask straps, enabling improved light for the user and
displaying your position to your buddies during diving. The powerful lumen LED is perfect
for reading gauges, slates and computers, etc. Patent: PAT. M409223
This handheld dive light utilizes the USA CREE XML U2 LED,
max 800 lumens output, Powered by 1*18650 lithium re-
chargeable battery, 2 hours runtime in high output, twist on/
off switch at head, very easy for you to operate, plus 8 degree
beam angle.
• Location: Clip on mask strap or your pockets.
• Material: Aluminum with anodized sandblasted
in black.
• Weight: 39 g (1 x AAA Alkaline battery SUS Clip
included.)
• Brightness: 120 lumens.
• Overall length: 10 cm.
• Waterproof: 120 meter.
• Burning time: 3 Hours (100% ~ 50%), 8 Hours
(100% ~ 10%).
• Bright Dia. / Distance: 25 cm / 1 Meter. 50 cm / 2
Meter. 75 cm / 3 Meter. 100 cm / 4 Meter.
• Accessories: Lanyard, 1 x AAA Alkaline Battery
Mask Strap Clip included.
Technical parameters
• Output: 800 Lumens
• Runtime: 2h
• Intensity: 18000cd
• Distance: 270m
• Drop resistant: 1,5m
• Water resistance:
IP68 (underwater 150m)
Product specification
• Utilize Cree XM U2 LED,
lifespan is 50 000 hours
• Powered by 1*18650 lithium
rechargeable battery
• Regulated power supply can maintain
constant output
• Overheat protection function
• Reverse polarity protection to protect
from wrong battery installation
• Super big lanyard hole design for bolt
snap mount
• Twist on/off switch, very easy to
operate
• Three O-rings design increases water
resistance to 150 meters
• The casing is made of durable
Aircraft-grade aluminum
• Premium type III military hard-
anodized finish for abrasion and
corrosion resistance
• Alloy aluminum reflector
• Dimensions: 40mm (head dia.)*26mm
(body dis.)*32mm (tail dis.)*142mm
(length)
• Standard accessories: 3 spare O-rings,
lubricant, lanyard, user manual
• Other accessories (optional):
wrist strap, batteries and charger
Product specification
• Light source: LED „Cree”
- XML U2,
• Light color: white
• LED’s lifespan:
about 100 000h
• Power: 10W, 1500 lm
• Beam angle: 10 degrees
• Color temperature:
6000 K - 7000 K
• Power supply: 3 x AA batteries
• Material: anodized aluminum
• Head: lens made of ultra-clear,
tempered glass and aluminum
reflector keeping ideal angle
of 10˚
• Water resistance:
200 m (IP 68)
• Working time: about 3h
• Size: 130mm x 50mm (head)
x 40 mm (body)
41. 41
LED LIGHTS
10W, 1500 lm
led light us-16
led light us-30
• Light source: LED „Cree”-XML U2,
light color: white
• LED’s lifespan: about 100 000h
• Power: 10W, 1500 lm
• Beam angle: 10 degrees
• Color temperature: 6000 K - 7000 K
• Power supply: 3 x C cells
• Material: anodized aluminum
• Head: lens made of ultra clear, tempered glass and
aluminum reflector keeping ideal angle of 10˚
• Water resistance: 200 m (IP 68)
• Working time: about 4,4 h
• Size: 220 mm x 50 mm (head) x 33 mm (body)
• Weight: 185 g (without batteries)
Ideal both as main and backup light.
Thanks to a cooling radiator on the torch’s housing,
the product doesn’t overheat on the surface and,
therefore, it is also ideal as a handheld torch at home
or in the car. Its low weight without the batteries (3 x C
cells) makes it perfect for traveling by air.
Led light US-30 flashlight provides a bright, focused beam with a wide and
long lighting range. High brightness, long lighting time, waterproof and reli-
ability are the characteristics of Tecline products. With such high-intensity
and solid design technology, US-30 flashlight is the best choice
for outdoor rescue and exploration, and meets the demands
for lighting in any harsh condition or climate.
Technical parameters
• LED diving torch, 90 meters diving depth
• Patented magnetic switch design
• Aluminum cup design,
irradiation distance 500 meters
• Cree 3*XML-U2 LED bulb(10W)
with max 2700 lumens
• Li-ion 2*18650 battery (2200mAh),
support 60 min full power
• Type II anodization, Anti-scraping
• 0-2700lm continuous adjustment
Product specification
• Water resistance:
IP68/Diving use
• Bulb type: 3*Cree XML-U2 LED
30W
• Max brightness: 2700 lumens
• Body material: Aviation
Aluminum : type II anodization
• Size: 200mm*44mm*26mm,
280g
LED LIGHT US-16 Goodman
• Light source: LED „Cree”- XML U2,
light color: white
• LED’s lifespan: about 100 000h
• Power: 10W, 1500 lm
• Beam angle: 10 degrees
• Color temperature: 6000 K - 7000 K
• Power supply: 4 x C cells
• Power control:100%, 50%
• Material: anodized aluminum
• Head: lens made of ultra clear, tempered glass
and aluminum reflector keeping ideal angle of 10˚
• Water resistance: 200 m (IP 68)
• Working time: about 2,5 h with 100% power
(total time to switching off≈8h)
• Size: 80 mm x 48 mm (head), 33 mm x 244mm
(body)
• Weight: 780 g (without batteries) with Goodman
handle
42. 42
undergarments
Undergarments TECLINE 3D MOBILITY Series 290 and 490
are designed for demanding divers diving in cold waters.
The best materials and the most advanced technologies
have been used by its manufacturing.
• Outer shell made of Pertex 40g/m2:
thin, smooth and extremely durable material
• 250g/m2 layer of Fleece inside:
advanced technical fleece with extra thermal properties
• Additional inner layer of micro fleece 200g/m2
in Undergarment Series 490
• Three pockets; one of them is zippered breast pocket
• Neoprene ankle cuffs
• Comfortable collar adding warmth
• Two-way convenience main zipper sealed with a band inside
• Wind stopping flexible waist panel, flexible armpit panels
• Both kinds of undergarment are equipped with suspenders
which can be regulated in a standard way
• Wrist cuffs which allow easy drysuit donning and let
the air flow to the gloves
• Machine and chemically washable
Well thought-out and carefully designed construction ensure
maximum motion comfort and warmth. Fleece, which has
been used as inside lining, has been compressed in order
not to take too much space under the drysuit. Fleece is soft
and comfortable.
TECLINE 3D MOBILITY
Undergarments key features: